3309677 PIN Caterpillar parts
434E, 444E
Rating:
Alternative (cross code) number:
CA3309677
330-9677
3309677
CA3309677
330-9677
3309677
Weight: 2 pounds 1 kg.
BACKHOE LOADER,
Number on catalog scheme:
21
For full view, you need register
Information:
Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Open the engine hood.
Drain the engine coolant from the radiator top tank into a suitable container for storage or disposal.
Illustration 1 g01175494
Remove bolts (1) .
Disconnect hose (2) .
Illustration 2 g01175495
Disconnect hoses (4) and (5) .
Remove bolts (3) and radiator top tank (6) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 3 g01175495
Position radiator top tank (6) and install bolts (3) .
Connect hoses (4) and (5) .
Illustration 4 g01175494
Install bolts (1) and connect hose (2) .
Refill the radiator top tank with coolant.
Close the engine hood.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Open the engine hood.
Drain the engine coolant from the radiator top tank into a suitable container for storage or disposal.
Illustration 1 g01175494
Remove bolts (1) .
Disconnect hose (2) .
Illustration 2 g01175495
Disconnect hoses (4) and (5) .
Remove bolts (3) and radiator top tank (6) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 3 g01175495
Position radiator top tank (6) and install bolts (3) .
Connect hoses (4) and (5) .
Illustration 4 g01175494
Install bolts (1) and connect hose (2) .
Refill the radiator top tank with coolant.
Close the engine hood.
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
12E, 12F, 14E, 16, 211B, 214B, 307B, 3114, 3116, 3126, 3208, 322, 325, 325 L, 325B L, 325C, 325D MH, 3304, 3304B, 3306, 3306B, 330B L, 330C MH, 330D MH, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, ...
414E, 416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428, 428B, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444...
246D, 24M, 262D, 272D, 277D, 279D, 287D, 289D, 299D, 305.5E, 345D, 345D L, 345D L VG, 349D, 349D L, 35, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, ...
216, 216B, 216B3, 226B, 226B3, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267B, 268B, 272C, 27...
416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424B, 424B HD, 424D, 426C, 428B, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E,...
416B, 420E, 426B, 428B, 430E, 432E, 434E, 442E, 444E, 450E, 69D
307D, 308D, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 442D, 442E, 444E, 444F
416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F
307D, 308D, 308E2 CR, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F
416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424B, 424B HD, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA...
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
434E, 444E
3309673
PIN
434E, 444E
434E, 444E
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 444F
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
3309683
PIN
434E, 444E
434E, 444E
3309682
PIN
434E, 444E
434E, 444E
3309681
PIN
434E, 444E
434E, 444E
3309680
PIN
434E, 444E
434E, 444E
3309679
PIN AS
434E, 444E
434E, 444E
434E, 444E