PIN 3309680 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-1858     Retaining Ring Pliers     1    
B     1U-8846     Gasket Sealant     1    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01175672
Illustration 2 g01175541
Install backup seals (17) and seal (16) on plate (15) .
Install plate (15) .
Illustration 3 g01175540
Install gear (14) and shaft (13) in body (5) .
Illustration 4 g01175539
Illustration 5 g01175538
Install backup seals (12) and seal (11) on plate (10) .
Install plate (10) .
Illustration 6 g01175536
Install O-ring seal (9) on flange (7) .
Illustration 7 g01175534
Install seal (8) .
Illustration 8 g01175533
Apply Tooling (B) to the mating surface of flange (7) .
Install flange (7) .
Use Tooling (A) to install retaining ring (6) .
Illustration 9 g01175532
Install O-ring seals (4) to body (5) .
Illustration 10 g01175531
Install cover (3) and bolts (2) .
Install plug (1) and the O-ring seal.End By: Install the gear motor for the hydraulic fan. Refer to Disassembly and Assembly, "Gear Motor (Hydraulic Fan) - Install".