PIN AS 3376481 - Caterpillar

Low Speed - Select the LOW SPEED position if you travel on rough surfaces or on soft surfaces or if you require a great drawbar pull. Also, select the LOW SPEED position if you are loading a machine onto a trailer or you are unloading a machine from a trailer.
Automatic - If you travel on a hard, level surface at a fast speed, select the AUTO position. Continuous driving at high speed should be limited to two hours. If you need to continue driving at high speed for more than two hours, stop the machine for ten minutes. This will cool down the travel drives before you resume driving.Window Wiper and Window Washer (11-12) and (15-16)
Lower Window Wiper (11) - Push down on the top of the switch in order to turn on the lower window wiper. Push down the bottom portion of the switch in order to turn off the lower window wiper.
Lower Window Washer (12) - Push down on the top of the switch and keep the switch depressed in order to activate the lower window washer. While the switch is depressed, the washer fluid will spray from the nozzle.
Window Washer (15) - Push the switch in order to activate the window washer. While the switch is depressed, the indicator light will come on and washer fluid will spray from the nozzle. The window wiper will also operate while the switch is depressed. After the switch is released for approximately three seconds, the window wiper will stop.
Window Wiper (16) - Push the switch in order to activate the window wiper. Whenever the switch is depressed, the mode of the window wiper will change according to the indicator light that is illuminated. Six Second Delay - When the window wiper switch is depressed one time, the first indicator light will turn on. The window wiper will operate intermittently at six second intervals.Three Second Delay - When the window wiper switch is depressed two times, the second indicator light will turn on. The window wiper will operate intermittently at three second intervals.Continuous Operation - When the window wiper switch is depressed three times, the first indicator light and the second indicator light will turn on. The window wiper will operate continuously.OFF - When the window wiper switch is depressed four times, the indicator lights will turn off. The window wiper stops.
If the wiper does not operate with the switch in the ON position, turn the switch off immediately. Check the cause. If the switch remains on, motor failure can result.
If the washer is used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result.
Fine Swing Control (13)
The fine swing control switch is on the right side instrument panel.
Fine Swing Control - Push down on the top of the switch in order to activate the