PIN & BUSHING GP 3497202 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Loctite 242     -    
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g03659035
Remove bolts (2) and cover (1). Repeat for the opposite side.
Illustration 2 g03659059
Disconnect hose assemblies (5). Remove fittings (4). Remove bolts (3) .
Illustration 3 g03659115
Remove bolts (6) and covers (7) .
Illustration 4 g03679771
Disconnect fitting assemblies (8) .
Use a suitable lifting device to remove swivel (9). The weight of swivel (9) is approximately 14 kg (31 lb).Installation Procedure
Install swivel (9) in the reverse order of removal.
Note position of dowel pin (not shown) on swivel (9) .
Apply Tooling (A) to the threads of bolts (3) .