PIN AS 3644922 - Caterpillar

Illustration 14 g06092673
Install cap adapter (25) onto tank assembly (23).
Illustration 15 g06092677
Install strainer (26) into tank assembly (23).
Illustration 16 g06092667
Install tank cap (24) onto tank assembly (23).
Illustration 17 g06091214
Install tank assembly (23) into the control cabinet. Install strap assemblies (22). Connect the two heater assemblies.
Install heater (27). Connect the harness assembly to heater (27).
Illustration 18 g06091188
Install hose assemblies (19), (20), and (21) from the tank assembly to the manifold group.
Illustration 19 g06091185
Install switch assembly (16) and bolts (18).
Illustration 20 g06091171
Install nuts to connect harness assemblies (17) to switch assembly (16).
Illustration 21 g06091147
Install the vent in the tank assembly. Connect hose (15) to the vent.
Illustration 22 g06091145
Install fluid level sensor assembly (14) in the tank assembly and secure with the machine screws.
Disconnect the harness assembly for fluid level sensor assembly (14).
Illustration 23 g06091136
Install electronic control group (11), bolts and studs (13), the mounts, and the spacers.
Illustration 24 g06091124
Connect harness assembly (10) and harness assembly (12) to electronic control group (11).
Illustration 25 g06091121
Install front door (9) and secure with bolts (8).
Illustration 26 g06091115
Install door assembly (7) and bolts (6).
Illustration 27 g06091111
Install connector (4). Position the hose and tighten clamp (5).
Illustration 28 g06091098
Install side door (3) and bolts (2). Repeat for the other side.
Illustration 29 g06091087
Install adapter assemblies (1) to the cabinet assembly.
Refill the tank assembly with urea.