PIN 3680186 - Caterpillar

This is a 3.0-hour job
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
1. Loosen bolts connected to the front side of console support. Move the console support fully forward. Loosen 4?9X-2043 screws joining the console and console support in the front on both sides.
Image1.1.1
Image1.1.2
2. Loosen bolts connected to the rear side of the console support. Loosen 4?9X-2043 screws joining the console and console support in the rear on both sides.
Image1.2.1
3. Loosen bolts connected to the front side of the seat slide rail. Loosen 2?245-7899 screws joining the seat and seat support in the front on both sides.
Image1.3.1
Image1.3.2
4. Loosen bolts connected to the rear side of the seat slide rail. Loosen 2?245-7899 screws joining the seat and seat support in the rear on both sides.
Image1.4.1
5. Remove 305-0350 former console support. Loosen 4?245-7899 screws joining the console support and seat support.
Image1.5.1
6. Install 316-8872 new console support kit. Tighten 4x245-7899 screws to a torque of 28 +- 7 Nm.
Image1.6.1
7. Connect seat slide rail to seat support. Tighten 4?245-7899 screws to a torque of 28 +- 7 Nm.
Image1.7.1
Image1.7.2
8. Connect both consoles to console support. Tighten 8?9X-2043 screws to a torque of 12 +- 3 Nm for RH & LH console.
Image1.8.1
Image1.8.2