PIN 3758293 - Caterpillar

(1) Nut for fuel line. Hold adapter assembly (2) when nut (1) is loosened or tightened. Tighten nut (1) to a torque of ... 40 7 N m (30 5 lb ft)(2) Torque for adapter assembly ... 53 7 N m (39 5 lb ft)(3) Torque for bleed screw ... 1.6 0.4 N m (14 4 lb in)(4) Washer. Make sure the correct washer is used when the nozzle assembly is installed. (5) Torque for clamp bolt ... 28 4 N m (21 3 lb ft)(6) Put liquid soap on the rubber O-ring seal and in the bore in the head before assembly.(7) Put 5P3931 Anti-Seize Compound on the threads of the adapter before installation. Tighten the adapter to a torque of ... 205 14 N m (150 10 lb ft)See Testing And Adjusting section, for fuel injection nozzle test procedure.