PIN 3G6049 - Caterpillar

Pumper:
SPF343C (S/N: RTX1-UP)
Petroleum Transmission:
CX48-P2300 (S/N: GDH1-UP)
TH48-E70 (S/N: JGC1-UP; KSH1-UP)
TH48-E80 (S/N: FRT1-UP)
TH55FT-E70 (S/N: PCJ1-UP)
TH55FT-E90 (S/N: THE1-UP)
Description of Change: The new 431-9645 Power Train Software Gp includes features to allow modified management of J1939 diagnostic trouble codes. Also, a feature to automatically protect the transmission from over temperature events.Note: A new CX48-P2300 Petroleum Transmission has recently been introduced that uses the new software. The 431-9645 Power Train Software Gp or higher software group is required for this new transmission.Adaptable To: The new 431-9645 Power Train Software Gp is effective with the following Petroleum Transmissions and Pumper:
CX48-P2300 (S/N: GDH1-UP)
TH48-E70 (S/N: JGC321-UP; KSH317-UP)
TH48-E80 (S/N: FRT1437-UP)
TH55-E70 (S/N: PCJ2386-UP)
TH55-E90 (S/N: THE331-UP)
SPF343C (S/N: RTX895-UP)The new 431-9645 Power Train Software Gp is adaptable to the following Petroleum Transmissions and Pumper:
TH48-E70 (S/N: JGC1-320; KSH1-316)
TH48-E80 (S/N: FRT1-1436)
TH55-E70 (S/N: PCJ1-2385)
TH55-E90 (S/N: THE1-330)
SPF343C (S/N: RTX1-894)431-9645 Power Train Software Gp has been released with the following feature changes:
New application code (8000) for the CX48-P2300 Petroleum Transmission
High temperature neutral configuration feature
Modification of diagnostic trouble code clearing through J1939 DM1 messageWhen enabled thru Cat® ET configuration, the high temperature neutral configuration feature automatically shifts the transmission to neutral if the torque converter outlet temperature exceeds 130° C (266° F). The transmission shifter must command neutral and torque converter outlet temperature must be less than 100° C (212° F) before additional shifting is allowed. The modification of diagnostic trouble code clearing through J1939 DM1 message feature allows the customer controller to acknowledge a select list of lower severity diagnostic trouble codes. The customer can then control the codes so the codes do not repeatedly display in the operator station.The 431-9645 Power Train Software Gp contains updates required for calibration of the CX48-P2300 Petroleum Transmission. The 417-1653 Power Train Software Gp is not compatable with the CX48-P2300 Petroleum Transmission.Note: Flashing the 431-9645 Power Train Software Gp or the 417-1653 Power Train Software Gp on ECM's with the 380-8929 Power Train Software Gp or older software will result in inaccuracies in transmission histogram tables.ReferenceRefer to the Systems Operation, Troubleshooting, Testing and Adjusting, KENR5904, "Power Train Electronic Control System", "Electronic Control Module (ECM) - Flash"ReferenceRefer to the Systems Operation, Troubleshooting, Testing and Adjusting, KENR5904, "Power Train Electronic Control System", "Program"ReferenceRefer to the Systems Operation, Troubleshooting, Testing and Adjusting, KENR5904, "Power Train Electronic Control System", "Electronic Control Module (ECM) - Configure"