PIN GP 3G8919 - Caterpillar

Service Screen - The Service screen allows the operator or service technician to change more advanced machine configurations or perform various calibrations. Some screens in the Service Menu are password protected for the service technician.Consult your Cat dealer for information about the service menu options.The Service Menu is arranged in five different areas:
Diagnostics
Configurations
Calibrations
ECM Summary
Service ModeDiagnostics
Diagnostics menu - The Diagnostics menu option provides the operator or technician a list of any active or logged diagnostic codes or events that have occurred on the machine.To view additional details of a particular code, use the up or down arrows at the top of the screen to highlight the desired code then select "OK".Configurations
Configurations Menu - The configurations menu option allows the operator or technician to change the advanced operational settings of the major systems. The menu organizes the systems into the following categories:
MachineAdditional configuration option menus may be available if certain features are installed on the machine.Machine
Auto Rear WiperAllows the operator to ENABLE or DISABLE the automatic rear wiper feature. The feature will automatically engage the rear window wiper when the machine is placed in reverse and the front wiper is activated.
BeaconAllows the operator to ENABLE or DISABLE the beacon feature. The feature allows for the beacon power connector to be controlled by the button on the keypad.Calibrations
Calibrations Menu - The calibrations menu option allows the operator or technician to perform various calibrations on the machine without the need for a service tool. The default calibrations present on the machine must be enabled via the service mode.Additional non-password protected calibration option menus may be available if certain features are installed on the machine.ECM Summary
ECM Summary - The ECM Summary menu allows the operator or technician to view the ECM information. Software and hardware information is provided for the various electronic control modules installed on the machine.Engine
Electronic Control Module (ECM) Serial Number
Hardware (HW) Part Number
Software (SW) Part Number
Software (SW) Release Date
Software Description
Engine Serial Number (S/N)Implement
Electronic Control Module (ECM) Serial Number
Hardware (HW) Part Number
Software (SW) Part Number
Software (SW) Release Date
Software DescriptionTransmission
Electronic Control Module (ECM) Serial Number
Hardware (HW) Part Number
Software (SW) Part Number
Software (SW) Release Date
Software Description
Transmission S/NProduct Link/VIMS
Electronic Control Module (ECM) Serial Number
Hardware (HW) Part Number
Software (SW) Part Number
Software (SW) Release Date
Software DescriptionGraphical Display
Electronic Control Module (ECM) Serial Number
Hardware (HW) Part Number
Software (SW) Part Number
Software (SW) Release Date
Software DescriptionIndication Display
Electronic Control Module (ECM) Serial Number
Hardware (HW) Part Number
Software (SW) Part Number
Software (SW) Release Date
Software DescriptionService Mode
The service mode option allows the operator or technician to enable password protected calibrations.Operator ID (If Equipped)
This screen allows the operator to change and manage operators IDs. The currently selected operator ID is saved with payload information when a truck payload is stored.Note: When Operator ID is enabled, the touchscreen will prompt the operator for a passcode when the machine starts up. To skip this screen without entering a passcode, the operator can press the next button.Change Operator: This allows the operator to change the currently selected operator with a new 4-digit passcode.Manage Operators: This allows the operator