PIN-BOOM 4422204 - Caterpillar

Illustration 5 g01065292
Hot surface! Do not touch!
Automatic Starting (2)This safety message for automatic starting is located on the side of the enclosure and the control panel.
Illustration 6 g01023635
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode.
Do Not Operate (3) This safety message is located on the rear of the enclosure and the control panel.
Illustration 7 g00920070
Do not operate or work on this engine or generator set unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals.Failure to follow the warnings and instructions could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Lifting the Genset (4)This safety message for lifting the genset is located on the side of the enclosure for enclosed gensets.
Illustration 8 g01023710
Crushing Hazard! Improper lifting could cause serious injury or death. Follow the lifting instructions in the Operation and Maintenance Manual for safe lifting procedures.
Electrical Shock (5)This safety message is located on the sides of the generator.
Illustration 9 g01018792
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Electrocution (6)This safety message for electrocution is located on the sides and the rear of the generator.
Illustration 10 g01065293
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Hot Coolant Under Pressure (7)This safety message is located near the top of the radiator on the front.
Illustration 11 g01053324
The coolant is hot and the coolant is under pressure. Do not touch the hot surfaces. Refer to the Operation and Maintenance Manual for the procedure to follow when you check the radiator.