PIN 4595342 - Caterpillar

Installation Procedure
Table 1
Tools Needed     A     B    
8S-9906 Ratchet Puller     1     2    
6V-2156 Link Bracket         2    
If the bearings were removed, install the bearings in the tractor main frame.
Illustration 1 g00672986
Fasten C-frame (1) to the lift truck with Tool (A) .
Illustration 2 g00672989
Put the C-frame in position, and install pins (4) on each side of the frame. Install the retainers and the bolts in order to hold the pins in position.
Put the hoses and clips (5) in position. Install the bolts that hold the hoses and the clips in place.
Illustration 3 g00672994
Connect hose assembly (3) on each side of the C-frame.
Illustration 4 g00673001
Use Tooling (B) to put the lift cylinders in position in the C-frame. Install the pins that hold the lift cylinders in position.
Illustration 5 g00673006
Put a wood block in position under the C-frame. Lower the C-frame on the wood block, and remove Tooling (A) and the lift truck.Note: Refer to the Operation And Maintenance Manual, "Lubricant Viscosities and Refill Capacities" for all fluid capacities and the proper filling procedures.End By:
Install the angle cylinders (angle bulldozer).
Install the bulldozer blade (angle bulldozer).