PIN-UPPER 4740872 - Caterpillar

1. Loosen screws (2) and put panel assembly (8) in the "OPEN" position.2. Put identification marks on wires (11) for correct assembly.3. Disconnect wires (11) from the switches.4. Remove the knobs from windshield wiper switch (5), horn switch (9) and ether starting aid switch (10).5. Remove the nuts, windshield wiper switch (5), high beam light switch (6), bowl flood light switch (1), low beam light switch (3), scraper transmission light (7), scraper transmission switch (4), horn switch (9) and ether starting aid switch (10).Install Front Left Instrument Panel
1. Put ether starting aid switch (8), horn switch (7), scraper transmission switch (5), scraper transmission light (6), low beam light switch (3), bowl flood light switch (1), high beam light switch (4) and windshield wiper switch (2) in position on the panel assembly. Install the nuts that hold them.2. Install the knobs on windshield wiper switch (2), horn switch (7) and ether starting aid switch (8). 3. Connect wires (9) to the switches.4. Put panel assembly (10) in the "CLOSED" position and tighten the screws that hold it.