PIN AS 4763110 - Caterpillar

Remove four bolts (15) and remove shields (16), (17), and (18).
Illustration 6 g06151517
Illustration 7 g06151518
Remove bolts (19), exhaust manifold (20), and bellows (21).
Repeat for all necessary manifolds and bellows.
Illustration 8 g06151519
Remove necessary V-band clamps (21).Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty.
A 5P-3931 Anti-Seize Compound -
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
Lubricate threads and bearing surfaces before assembly.
Illustration 9 g06151519
Illustration 10 g06149724
Position and install V-band clamps (22).
Gap (x) is to be 12.7 3 mm (0.5 0.1 inch).
Tighten V-band clamps (22) to a torque of 12 N m (9 lb ft)..
Illustration 11 g06151518
Illustration 12 g06151517
Position exhaust manifold (20) and bellows (21).
Install bolts (19).
Tighten bolts (19) to a torque of 55 5 N m (40.5 4 lb ft).
Illustration 13 g06151514
Position shields (16), (17), and (18).
Install four bolts (15).
Illustration 14 g06150995
Position shields (13) and (14) and install seven bolts (12).
Tighten two bolts (11).
Illustration 15 g06150989
Position shields (9) and (10) and install four bolts (8).
Illustration 16 g06150963
Position shields (7) and (6) and install six bolts (5).
Illustration 17 g06150950
Position shields (1), (2), and (4) and install nine bolts (3).