PIN 4764623 - Caterpillar

Illustration 1 g00629751
FLOAT (1) - Push the single lever control forward into the detent. The work tool will lower to the ground. The work tool will follow along the contour of the ground. The single lever control will remain in the FLOAT position until the single lever control is pulled out of the detent. The single lever control will return to the HOLD position when the single lever control is released.
LOWER (2) - Push the single lever control forward in order to lower the work tool. The single lever control will return to the HOLD position when the single lever control is released.
HOLD (3) - The single lever control will return to the HOLD position when the single lever control is released from the RAISE position or from the LOWER position. The work tool will remain in the selected position.
RAISE (4) - Pull the single lever control backward in order to raise the work tool. Release the single lever control in order to stop lifting the work tool. The single lever control will return to the HOLD position when the single lever control is released.
TILT BACK (5) - Move the single lever control toward the left in order to tilt the work tool backward.
DUMP (6) - Move the single lever control toward the right in order to tilt the work tool forward.