PIN 4928848 - Caterpillar

Illustration 7 g00576240
Illustration 8 g00576839
Install O-ring seals (5) and (6) in seal assembly (3) . Lubricate seal (6) with Tooling (K) .
Install seal assembly (3) . Position adapter (4) . Ensure that the dowel in adapter (4) engages the hole in the camshaft.
Position thrust plate (1) . Apply Tooling (J) to bolts (2) . Hold thrust plate (1) in position and install bolts (2) . Evenly tighten bolts (2) until seal assembly (3) and O-ring seal (5) are seated against the cylinder head.Note: Be careful in order to ensure that O-ring seal (5) stays in the groove in seal assembly (3) .End By:
Install the rocker arms and the rocker shafts. Refer to