PIN 4B2906 - Caterpillar

Intended Use
This machine is classified as a Wheel Loader as described in "ISO 6165:2001". This machine normally has a front mounted bucket for the principal intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock, or gravel. Additional work tools allow this machine to perform other specific tasks.Application/Configuration Restrictions
Refer to "Machine Data" below for information about maximum machine weight.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.With full fluids, the maximum fore and aft continuous slope operation for proper lubrication is 30 degrees.This machine is approved for use in environments with no explosive gases.Machine Data
The 966H machines are equipped with a C11 Engine. The 972H machines are equipped with a C13 Engine. Basic machine specifications are listed in the following tables.
Table 1
966H Wheel Loader
Operating Weight 23461 kg (51723 lb)
Shipping Weight 23068 kg (50856 lb)
Maximum Length 8863 mm (349 inches)
Bucket Width 3145 mm (124 inches)
Height to Top of ROPS 3580 mm (141 inches)
Table 2
972H Wheel Loader
Operating Weight 25276 kg (55724 lb)
Shipping Weight 24885 kg (54862 lb)
Maximum Length 9218 mm (363 inches)
Width 3145 mm (124 inches)
Height to Top of ROPS 3586 mm (141 inches)