4E5604 PIN Caterpillar parts
990, 990 II, 990H, 990K
Rating:
Alternative (cross code) number:
CA4E5604
4E-5604
4E5604
CA4E5604
4E-5604
4E5604
Weight: 110 pounds 49 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$2,013.18
30 May 2020
-: -
4E5604 PIN
4E5604 PIN
4E5604 PIN
Number on catalog scheme:
4
For full view, you need register
Information:
CONFIDENTIAL TIBU3633
TECHNICAL INFORMATION BULLETIN JUNE 20, 2002
ENGINES 3408E (7PR)
3412E (4CR, BDT)
C-10 (BCX)
C-12 (BDL)
C-15 (BEM)
C-16 (BFM)
INDUSTRIAL ENGINES
Component Code: 1456SUBJECT: ETHER START AID OPERATION
PROBLEM:
The 143-8872 ether start aid (3408E, 3412E, C15, C16) and 193-8091 ether start aid (C10, C12) may not work properly. The software of 3408E and 3412E is designed for continuous and pulsed mode ether operation, the default setting is continuous. However, the ether solenoid valve (3E6333) mounted on the ether container requires a pulsed signal to work properly.
The software of C10, C12, C15 and C16 industrial engines is designed for continuous ether mode operation only. The solenoid valves 3E6333 (C15, C16) and 3E6332 (C10, C12) part of 143-8872 and 193-8091 ether start aid group however require a pulsed signal.
SOLUTION:
3408E, 3412E: Prior to delivering the engine to the customer or putting the engine into service, change the default setting from continuous to pulse mode. The ECM will activate ether injection automatically (provide a pulse signal to the ether solenoid valve) when the engine oil temperature is between minus 60 deg C and 0 (zero) deg C and engine speed is between 10 and 500 rpm. Installing and wiring up a switch (3T-0306) to pin 38 of J3/P3 provides manual (operator controlled) ether injection. If engine oil temperature is between minus 60 deg C and +10 deg C, engine rpm is between 10 and 1200 rpm, ether is injected every time the switch is cycled.
C10 through C16: Due to the solenoid valves not being compatible, automatic ether injection will not occur. To make ether injection possible, install and wire up a switch (3T-0306) to pin 38 of J61/P61. This will allow for manual (operator controlled) ether injection. Cycling the switch will initiate ether injection provided engine rpm is between 30 and 1500 rpm and when coolant, fuel or inlet air temperature is below 65 deg C.
A production fix is expected to occur by October 2002.
COPYRIGHT 2002 CATERPILLAR
ALL RIGHTS RESERVED
TECHNICAL INFORMATION BULLETIN JUNE 20, 2002
ENGINES 3408E (7PR)
3412E (4CR, BDT)
C-10 (BCX)
C-12 (BDL)
C-15 (BEM)
C-16 (BFM)
INDUSTRIAL ENGINES
Component Code: 1456SUBJECT: ETHER START AID OPERATION
PROBLEM:
The 143-8872 ether start aid (3408E, 3412E, C15, C16) and 193-8091 ether start aid (C10, C12) may not work properly. The software of 3408E and 3412E is designed for continuous and pulsed mode ether operation, the default setting is continuous. However, the ether solenoid valve (3E6333) mounted on the ether container requires a pulsed signal to work properly.
The software of C10, C12, C15 and C16 industrial engines is designed for continuous ether mode operation only. The solenoid valves 3E6333 (C15, C16) and 3E6332 (C10, C12) part of 143-8872 and 193-8091 ether start aid group however require a pulsed signal.
SOLUTION:
3408E, 3412E: Prior to delivering the engine to the customer or putting the engine into service, change the default setting from continuous to pulse mode. The ECM will activate ether injection automatically (provide a pulse signal to the ether solenoid valve) when the engine oil temperature is between minus 60 deg C and 0 (zero) deg C and engine speed is between 10 and 500 rpm. Installing and wiring up a switch (3T-0306) to pin 38 of J3/P3 provides manual (operator controlled) ether injection. If engine oil temperature is between minus 60 deg C and +10 deg C, engine rpm is between 10 and 1200 rpm, ether is injected every time the switch is cycled.
C10 through C16: Due to the solenoid valves not being compatible, automatic ether injection will not occur. To make ether injection possible, install and wire up a switch (3T-0306) to pin 38 of J61/P61. This will allow for manual (operator controlled) ether injection. Cycling the switch will initiate ether injection provided engine rpm is between 30 and 1500 rpm and when coolant, fuel or inlet air temperature is below 65 deg C.
A production fix is expected to occur by October 2002.
COPYRIGHT 2002 CATERPILLAR
ALL RIGHTS RESERVED
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
365B, 365B II, 735, 735B, 740, 740B, 776D, 777D, 777F, 777G, 834K, 836K, 844, 924K, 930K, 938K, 950 GC, 950H, 962H, 963D, 973D, 986H, 990, 990 II, 993K, D10T, D10T2, D11T, D350E II, D400E II, D6T, D6T...
330B L, 330D L, 336D, 336E, 336E H, 345B, 345B II, 345B L, 350, 365B, 365C, 374D L, 375, 375 L, 5110B, 834G, 834H, 972H, 972K, 973D, 988F, 988F II, 988G, 988H, 990 II, 990H, 990K, 992C, 992D, 992G, 99...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
12H, 140H, 14H, 16H, 330C, 330C FM, 330C L, 330C MH, 621G, 623G, 627G, 631E, 631G, 637E, 637G, 725, 730, 735, 735B, 740, 740B, 844K, 938G, 950G, 990K, 993K, D10N, D10R, D10T, D250E II, D300E II, D350E...
10 FT, 10-20B, 508, 518, 528, 613, 613B, 613C, 613C II, 613G, 615C, 623G, 623H, 623K, 623K LRC, 8 FT, 8-16B, 814, 814B, 815, 815B, 816, 816B, 824C, 910, 916, 920, 926, 926A, 930, 936, 950, 950B, 950B/...
345B II, 345C L, 350, 365B, 365B II, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 385C L, 390D, 5080, 5110B, 5230, 980G, 988H, 988K, 990, 990 II, 990H, 992G
990, 990 II, 990H, 990K, 992K
990, 990 II
990, 990 II, 992C, 992D, 994F, 994H
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
988F II, 988G, 990 II, 992G
4E5599
PIN AS
990, 990 II, 990H, 990K
990, 990 II, 990H, 990K
990, 990 II, 990H, 990K, 992K
1157787
PIN
988K, 990, 990 II, 990H, 990K
988K, 990, 990 II, 990H, 990K
988K, 990, 990 II, 990H, 990K
525D, 535D, 545D, 555D, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE, 980G, 980G ...
966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
2183125
PIN AS
950G II
950G II
1772323
PIN AS
966G, 966G II, 972G II
966G, 966G II, 972G II
992G
1461890
PIN
824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 988G, 988H
824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 988G, 988H
1V0134
PIN
834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 988F II, 988G, 988H, 988K, 990, 990 II, 990H, 990K, 992, 992C, 992D, 992G, 992K, 993K
834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 988F II, 988G, 988H, 988K, 990, 990 II, 990H, 990K, 992, 992C, 992D, 992G, 992K, 993K
990, 990 II