4N0443 PIN-LOAD STOP Caterpillar parts
120B, 120G, 12G, 130G, 140B, 140G, 14G, 1673C, 215, 225, 227, 229, 231D, 235, 3208, 3304, 3306, 518, 528, 613B, 613C, 637D, 920, 930, 941, 950, 951B, 955K, 955L, 966C, 977K, 977L, CB-614, CS-551, D4D,...
Rating:
Alternative (cross code) number:
CA4N0443
4N-0443
4N0443
CA4N0443
4N-0443
4N0443
Weight: 0.01 pounds 0 kg.
COLD PLANER, WHEEL TRACTOR,
Compatible equipment models: 4N0443:
Number on catalog scheme:
6
For full view, you need register
Information:
When the solenoid is installed, make an adjustment of the pinion clearance. The adjustment can be made with the starting motor removed.
Illustration 1 g01097807
Connection for checking pinion clearance
(1) Connector to the motor
(2) Switch terminal
(3) Ground terminal
Install the solenoid without connector (1) from the MOTOR connections (terminal) on the solenoid to the motor.
Connect a battery, that has the same voltage as the solenoid, to the "SW" terminal (2).
Connect the other side of the battery to ground terminal (3).
Temporarily, connect a wire from the solenoid connection (terminal), which is marked "MOTOR", to the ground connection (terminal). The pinion will shift to the crank position and the pinion will stay there until the battery is disconnected.
Illustration 2 g01386517
(A) Pinion clearance
(4) Shaft nut
(5) Pinion
Push the pinion toward the end with the commutator in order to remove free movement.
Pinion clearance (A) must be 9.10 mm (0.358 inch).
In order to adjust the pinion clearance, remove the plug and turn the shaft nut (4).
After the adjustment is completed, install the plug over the nut (4) and install the connector (1) between the MOTOR terminal on the solenoid and the starting motor.
Illustration 1 g01097807
Connection for checking pinion clearance
(1) Connector to the motor
(2) Switch terminal
(3) Ground terminal
Install the solenoid without connector (1) from the MOTOR connections (terminal) on the solenoid to the motor.
Connect a battery, that has the same voltage as the solenoid, to the "SW" terminal (2).
Connect the other side of the battery to ground terminal (3).
Temporarily, connect a wire from the solenoid connection (terminal), which is marked "MOTOR", to the ground connection (terminal). The pinion will shift to the crank position and the pinion will stay there until the battery is disconnected.
Illustration 2 g01386517
(A) Pinion clearance
(4) Shaft nut
(5) Pinion
Push the pinion toward the end with the commutator in order to remove free movement.
Pinion clearance (A) must be 9.10 mm (0.358 inch).
In order to adjust the pinion clearance, remove the plug and turn the shaft nut (4).
After the adjustment is completed, install the plug over the nut (4) and install the connector (1) between the MOTOR terminal on the solenoid and the starting motor.
Cat SIS web machinery list:
Parts pin Caterpillar catalog:
120G
120G
12G, 130G
14G, 16G
14G
14G
14G
130G
130G
130G
14G, 16G
120B, 12E, 140B
9Y7061
PIN
3208
3208
215, 225, 227, 3204, 3208, 613B, 613C, 931B, 943, 953, CS-551, D3, D4HTSK II, D5C, FB221, PR-1000, PS-500
3208, 613B, 613C, CS-551, FB221, PR-1000, PS-500
120, 120B, 12E, 140, 140B, 3116, 3126, 3126B, 3208, C7
7W5599
PIN
3116, 3126, 928F, IT28F
3116, 3126, 928F, IT28F
3406, 3406B, 3516, 769C, 769D, 771C, 771D, 773B, 773D, 773F, 775B, 775D, 775F, AD40, AD45, AD45B, AD55, AD55B, AD60, AE40, AE40 II, D342, D342C, D350E, D350E II, D400E, D400E II, D40D
3176B, 3176C, 3196, 3406B, 3406E, 3412E, C-12, C-15, C12, C15, C18, C30, C32
304.5, 305, 305.5, 306, 350, 3508, 3512, 3512B, 3516, 3516B, 365B, 365B II, 365B L, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 5080, 5090B, 5130, 5130B, 5230, 844, 854G, 990, 990 II, 992G,...
3408B, 3408C, 3412, 3412C, PM3412, SCT673, SPS342, SPT342
9Y6079
PIN-CONTROL
3408B, 3412
3408B, 3412
1674, 245, 3406, 3408B, 3408C, 3412, 3412C, 517, 527, 641B, 772, 773, 777, 910, 916, 926, 926A, 931B, 931C, 931C II, 933, 939, 992, D10, D334, D348, D398, D3C, D3C III, D4B, D4C, D4C III, D4H, D4H XL,...
120G, 12G, 130G, 140B, 140G, 14G, 1673C, 215, 225, 231D, 235, 3160, 3208, 3304, 3306, 518, 613B, 613C, 627B, 637D, 920, 941, 950, 955L, 980B, CB-614, CS-551, D4D, D4E, D5, D5B, D6C, D6D, D7F, D7G, PM-...