PIN 4T7534 - Caterpillar

(1) Maximum high idle position.(2) High idle position.(3) Vertical line.(4) Low idle position.(5) Shutoff position.(6) Bolt.(7) Locknut.(8) Lever.(9) Length of rod ... 39.75 in.(101 cm)Adjustment Procedure:Off Position: Put lever (8) on the governor control shaft as shown. With lever (8) in the shutoff position (5), adjust the length of the rods to put the operator pedal at the position shown. Do not change the length of rod (9) from the dimension shown.High Idle Position: Put the operator pedal in the position that puts the governor control lever (8) in the high idle position (2). Adjust the bolt (6) to keep the operator pedal from moving farther toward the floor. Tighten the locknut (7).