AVSPARE.COM
parts catalog

PIN 4Z8676 - Caterpillar



4Z8676 PIN Caterpillar parts PIN
Rating:
46
Alternative (cross code) number:
CA4Z8676
4Z-8676
4Z8676
Caterpillar 4Z8676 PIN
Weight: 3 pounds 1 kg.

Buy PIN 4Z8676 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Assembly Procedure
Illustration 1 g02669323
Install the O-ring seals and plugs (36). Tighten plugs (36) to a torque of 10 1 N m (89 9 lb in).
Illustration 2 g02669326
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Note: Lubricate the O-ring seals and the backup rings with lubricant that is being sealed.
Install O-ring seal (35) onto body (34).
Install O-ring seal (31) and backup rings (32) onto valve (30).
Install O-ring seal (24), backup rings (25), and O-ring seal (26) onto body (23).
Install O-ring seal (20) onto screw (19).
Install valve (33), valve (30), plunger (29), spring (28), spring (27), body (23), plunger (22), spring (21), screw (19), and nut (18) into body (34). Tighten body (23) to a torque of 59 6 N m (44 4 lb ft). Tighten nut (18) to a torque of 20 2 N m (177 18 lb in).
Illustration 3 g02669337
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install backup ring (14) and O-ring seal (15) onto cover (13).
Install valve (17), spring (16), cover (13), and bolts (12). Tighten bolts (12) to a torque of 55 10 N m (41 7 lb ft).
Illustration 4 g02669397
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install piston (4), O-ring seal (3), cover (2), and bolts (1). Tighten bolts (1) to a torque of 28 7 N m (21 5 lb ft).
Install spool assembly (5), retainer (6), spring (7), O-ring seal (8), cover (9), and bolts (10). Tighten bolts (10) to a torque of 28 7 N m (21 5 lb ft). End By:
Install the load control valve (stick cylinder).


Parts pin Caterpillar catalog:

4Z8412 PIN
Caterpillar
4Z8393 PIN
Caterpillar
4Z8924 PIN
Caterpillar
4Z8923 PIN
Caterpillar
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.