AVSPARE.COM
parts catalog

PIN-SPRING 4Z8683 - Caterpillar



4Z8683 PIN-SPRING Caterpillar parts PIN
Rating:
81
Alternative (cross code) number:
CA4Z8683
4Z-8683
4Z8683
Caterpillar 4Z8683 PIN-SPRING
Weight: 0.11 pounds 0 kg.

Buy PIN-SPRING 4Z8683 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 23 g01217850
Install bolts (3).
Illustration 24 g01217839
Illustration 25 g01217840
Turn bolt (2) clockwise into the original position. Tighten nut (1).Disassembly and Assembly Information
Table 3
Required Tools
Tool Part Number Part Description Qty
B 127-4904 Hydraulic Cylinder Repair Stand Gp 1
C - Loctite 609 1
D 1P-0808 Multipurpose Grease 1
E 195-4609 Seal Pick 1
F 350-7768 Electric Hydraulic Pump Gp 1
350-7769(1) Electric Hydraulic Pump Gp 1
6V-3175 Double Acting Cylinder 1
9S-5564 Pin Puller Sleeve As 1
9U-6832 Nut 1
4C-9634 Puller Stud 1
9U-5338 Bearing Puller Adapter 1
G 350-7768 Electric Hydraulic Pump Gp 1
350-7769(2) Electric Hydraulic Pump Gp 1
6V-3175 Double Acting Cylinder 1
9S-5564 Pin Puller Sleeve As 1
9U-6832 Nut 1
4C-9634 Puller Stud 1
9U-5339 Bearing Puller Adapter 1
(1) CE Compliant
(2) CE Compliant
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 26 g01218033Note: Tooling (F) is used for the removal and installation of bearing (8). Tooling (G) is used for the removal and installation of bearing (2). (3) Torque for the nut ... 5460 260 N m (4027 190 lb ft) (1) Torque for the bolts ... 267 40 N m (196 30 lb ft)
Illustration 27 g03583864Tighten the setscrew that retains nut (3) to a torque of 57 11 N m (42 8 lb ft). Stake the setscrew in place as per (9A).Stake neThe slit of ring (5) must be in the direction of the piston.Apply Tooling (D) to seals (4) prior to assembly.Lubricate seals (6) with the lubricant that is being sealed.Apply Tooling (C) to the wiper seal (7) prior to assembly.


Parts pin Caterpillar catalog:

4Z8676 PIN
Caterpillar
4Z8924 PIN
Caterpillar
4Z8923 PIN
Caterpillar
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.