PIN AS 5365608 - Caterpillar

3408 shown1. Remove cable (1) from the magneto assembly.
3412 shown2. Remove cables (2) and (3) from the magneto assembly.
3408 shown3. Remove bolt (4) from the rear of the magneto.4. Loosen bolts (6) and slide bracket (5) to the rear. 5. Remove bolts (8) and magneto (7).Install Magneto (3408 & 3412)
1. Put magneto assembly (1) in position and install bolts (2). 2. Slide bracket (5) on magneto assembly. Install bolt (3) and tighten bolts (4) and (6).
3408 shown3. Install cable (7) and remove plug (8).
3412 shown4. Install cables (9) and (10) on magneto assembly. 5. Remove timing gear cover (11) from the engine. 6. Loosen bolts (12) and retainer. Rotate retainer until the timing mark appears in magneto plug hole. 7. Remove bolts (13) and access covers (14). 8. Install a suitable engine turning tool and rotate the flywheel until the timing mark is clearly seen. Check to see if the No. 1 cylinder is in the top center position. 9. Tighten bolts (15) to a torque of 135 7 N m (100 5 lb.ft.). 10. Install timing gear cover (16). 11. Install covers (17) and (18) on the flywheel housing. 12. Install plug (19) in the magneto assembly.