PIN 5369318 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. The capacity of the cooling system is approximately 132 L (35 US gal). Refer to Operation and Maintenance Manual, SEBU7244, "Cooling System (DEAC) Coolant - Change".
Illustration 1 g00819146
Remove oil filters (1).
Illustration 2 g00819153
Cut cable ties (4).
Remove bolts (3).
Remove oil pan plate (2).
Illustration 3 g00819219
Remove bolts (5) and washers.
Illustration 4 g00819256
Remove bolts (6) and washers.
Illustration 5 g00819382
Remove bolts (7) and washers.
Remove bracket (8) and base assembly (8A).
Illustration 6 g00819269
Remove bolts (10) and washers.
Remove retainers (9).
Illustration 7 g00819280
Remove bolts (11) and washers.
Remove elbow (12).
Illustration 8 g00819281
Remove bolt (15) , the washer, and the spacer.
Loosen bolt (13).
Lower rod (14).
Illustration 9 g00819330
Remove bolts (16) and washers.
Remove bolts (17) and washers.
Remove bracket (18).
Illustration 10 g00819333
Loosen clamp (19).
Remove bolts (20) and washers.
Remove bolts (21).
Move elbow (22) aside.
Illustration 11 g00819337
Remove nuts (23), washers, and spacers.
Remove bracket (24).