PIN-PISTON 5371700 - Caterpillar

Illustration 2 g01066059
Guidance screen (Linked Elevation mode) (1) Left Laser Receiver Strike Window (2) Guidance Sensor Icon (3) Right Laser Receiver Strike Window (4) Reference Elevation (5) Elevation Display Icon (6) Device Status IconsA screen that is similar to Illustration 1 is shown when you are in Linked Elevation mode.Independent Elevation Mode
Independent Elevation mode operates with a dual mast system. Independent Elevation mode requires the reference elevation for each mast to be set independently. This means that the blade must be benchmarked under the left and the right mast separately. Refer to Operation and Maintenance Manual, "Setting the Reference Elevation (Dual Mast System)" for more information on the process that is used to benchmark the blade using Independent Elevation Mode.
The display shows the two reference elevations that are being worked toward.
Toggle the left mast elevation/menu scroll switch in order to move the left mast upward or downward. The elevation offset is applied only to the left side of the blade.
Toggle the right mast elevation/menu scroll switch in order to move the right mast upward or downward. The elevation offset is applied only to the right side of the blade.Note: Toggling the remote increment/decrement rocker switch that controls (Elevation Offset) applies the same elevation offset to both masts.
Pressing the ESCL/left reset button searches for the laser beam and locks on to the laser beam on the left receiver.
Pressing the OK/right reset button searches for and locks on to the laser beam on the right receiver.
The elevation select switch is active in Independent Elevation Mode.Toggling the elevation select switch to the center position ensures both sides of the machine to use automatic or manual mode together.Toggling the elevation select switch to the right position permits the right side of the machine to use automatic mode or manual mode. The left side is always in manual mode.If one of the laser receivers is blocked when the system is in dual mast and made inactive then the other laser receiver is also made inactive.If one of the laser receivers is blocked when the system is in single mast, the active receiver is not effected when the other side is blocked.
The Linked Elevation Adjustment option in the "Configuration" menu is not available.
Illustration 3 g01074826
Guidance screen (Independent Elevation mode) (7) Left Reference Elevation (8) Right Reference ElevationA screen that is similar to Illustration 3 is shown when you are in Independent Elevation mode:Dual Cut/Fill Mode
The dual cut/fill mode is only operated with a dual mast system.The following items describe the operation of the AccuGrade Laser system in dual cut/fill mode:
The display shows the cut/fill that is required to reach each mast's reference elevation. A positive value is cut and a negative value is fill.
Both mast elevation/menu scroll switches are disabled.
Both the OK/right reset button and the ESC/left reset button are disabled.
The remote offset switch is disabled.
The elevation select switch is active in dual cut/fill mode. Toggling the elevation select switch to the center position allows both sides of the machine to use automatic mode or manual