PIN AS 5401967 - Caterpillar

Illustration 1 g01393900
(1) Torque for the bolts ... 9.5 2.8 N m (85 25 lb in)Note: Nozzle assembly must be supported with the wrench when fuel injection line assembly is attached. (2) Torque for the injection line nuts ... 40 7 N m (30 5 lb ft) (3) Lubricate the seal lightly with the lubricant that is being sealed. (4) Torque for the taperlock studs ... 15 5 N m (11 4 lb ft) (5) Lubricate the bore for the O-ring seal lightly with the lubricant that is being sealed.
Failure to properly replace or install a fuel injection line clamp may lead to fuel line failure. Fuel line failure may result in a fire hazard, which may cause personal injury or death. The fuel injection line clamps must be installed per these specifications.