5B1133 PIN-CLEVIS Caterpillar parts
120B, 12E, 140, 140B, 14E, 35, 45, 55, 931, 955L, D337F, D353C, D379A, D397D
Rating:
Alternative (cross code) number:
CA5B1133
5B-1133
5B1133
CA5B1133
5B-1133
5B1133
Weight: 0.02 pounds 0 kg.
Information:
EFFECTIVE LENGTH
28.5
mm
HEAD OD
9.5
mm
OVERALL LENGTH
37.7
mm
PIN OD
6.22
mm
TRANSV HOLES
Y
DETENT BALL
N
END TYPE A
CHAMFER
END TYPE B
CHAMFER
GROOVE
N
HAND RING
N
HEAD THICKNESS
2.2
KEEPER SLOT
N
LUBE OUTLETS
N
COATING/PLATING
1E0397
CHALLENGER, TRACK LOADER,
Compatible equipment models: 5B1133:
Number on catalog scheme:
None
For full view, you need register
Information:
1.1 Liter Family Of EnginesWhen reconditioning or replacing the injector sleeves in a cylinder head from the 1.1 Liter Family Of Engines, it may be necessary to enlarge the injector tip bores (lower pilots) in the cylinder head. Due to a change in the tip bore diameter tolerance, it may be necessary to ream the bore to a larger diameter to provide adequate clearance for the lower pilot of the sleeve reamer. Because lower tip bores that are too small have been discovered randomly, it is recommended to ream all lower tip bores in the cylinder head before using the injector sleeve reamer.
The 9U6101 Lower Pilot Reamer Group consists of the components identified in the chart and illustration. The 9U6105 Guide Bushing (2) is inserted into the 4C8714 or 4C8715 Guide Bushing (part of the 4C4462 Sleeve Replacement Tool Group) to provide accurate location. The 9U6103 Collar (4) is used to drive the reamer with a 3/4 inch wrench or socket. The 9U6102 Reamer (1) is made from high quality tool steel for a long service life. The reamer group comes in a protective tube. This tube can be used for storage to help prevent damage to the tool group.
Location of components of the 9U6101 Reamer Group.
The 9U6101 Lower Pilot Reamer Group consists of the components identified in the chart and illustration. The 9U6105 Guide Bushing (2) is inserted into the 4C8714 or 4C8715 Guide Bushing (part of the 4C4462 Sleeve Replacement Tool Group) to provide accurate location. The 9U6103 Collar (4) is used to drive the reamer with a 3/4 inch wrench or socket. The 9U6102 Reamer (1) is made from high quality tool steel for a long service life. The reamer group comes in a protective tube. This tube can be used for storage to help prevent damage to the tool group.
Location of components of the 9U6101 Reamer Group.
Cat SIS web machinery list:
Parts pin Caterpillar catalog:
1140, 1145, 1150, 1160, 120G, 120M, 120M 2, 127, 12G, 12H, 12H ES, 12H NA, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14G, 14H NA, 14M, 1...
10 FT, 10-20B, 10B, 117, 118, 119, 120, 120B, 120G, 127, 128, 129, 12E, 12F, 12G, 130G, 140, 140B, 140G, 141, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 163, 1673, 16G, 16H, 16H NA, 16M, 172, 173B, 183, 18...
120B, 12E, 140, 140B, 16, 215, 225, 227, 235, 245, 3176, 3208, 320B FM LL, 322B L, 325B L, 330, 330 L, 330B L, 426, 428, 539, 561D, 65, 725C, 730C, 735B, 740B, 75, 777, 784B, 784C, 785, 785B, 785C, 78...
583H, 594, 594H, 769C, 955C, 955H, 955K, 955L, D315, D320A, D326F, D330A, D337, D337F, D342, D342C, D353C, D8H, D8K, D9G, D9H
10 FT, 10B, 117, 118, 119, 120, 120B, 127, 129, 12E, 12F, 140, 140B, 141, 14E, 153, 16, 163, 172, 183, 184, 191, 227, 24, 25, 30, 3508, 3512, 3516, 44, 46, 515, 525, 525B, 525C, 535B, 535C, 545, 545C,...
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 215, 215B, 224B, 235B, 235D, 320 L, 325 L, 950, 950B, 950F, 950G, 951B, 955L, 962G, 963, 966C, E140, E200B
120, 120B, 12E
120, 120B, 12E
140, 140B, 14E
1554936
PIN AS
35, 45, 55
35, 45, 55
1508849
PIN-TRIGGER
35, 45, 55
35, 45, 55
1508763
PIN AS
35, 45, 55
35, 45, 55
1641020
PIN AS
35, 45, 55
35, 45, 55
1537752
PIN AS
35, 45, 55
35, 45, 55
1835008
PIN-SPRING
35, 45, 55
35, 45, 55
1935856
PIN AS
35, 45, 55
35, 45, 55
1630570
PIN
35, 45, 55
35, 45, 55
1524241
PIN
35, 45, 55
35, 45, 55
1520781
PIN AS
35, 45, 55
35, 45, 55
35, 45, 55
1513095
PIN AS
35, 45, 55
35, 45, 55