PIN AS 5C6690 - Caterpillar

Install a 6J-7366 Flared Cap at location (E) .
Install one 0S-1591 Bolt and one 8M-9024 Hard Washer at location (F) .
Remove the 9S-8006 O-Ring Plug and the 6V-4589 O-Ring Seal from location (H). Install the 9S-8006 O-Ring Plug and a new 6V-4589 O-Ring Seal at location (G) .
Remove the two 0S-1591 Bolts and two 3V-3308 Washers from location (J) .
Illustration 4 g00661488
This illustration shows the location of parts that are necessary to update the 7E-6212 Prelubrication Lines Group and the 7E-6213 Prelubrication Lines Group . (X) Rear view of engine (Y) Right side view of engine
Refer to Illustration 4. Remove the 9S-8006 O-Ring Plug and the 6V-4589 O-Ring Seal from location (K) .
Install the parts that are listed in Table 5.
Table 5
Parts That Are Necessary To Update The 7E-6212 Prelubrication Lines Group And The 7E-6213 Prelubrication Lines Group    
Item     Quantity     Part Number     Description    
16     1     175-4463     Housing    
29     1     7K-9197     Elbow    
30     1     175-5312     Tube    
31     2     0S-1571     Bolt    
32     2     3V-3308     Washer    
33     4     030-8195     Flared Connector    
34     4     6V-4589     O-Ring Seal    
35     1     175-5311     Tube    
Install the 121-0597 Liquid Detector Group (6) that was previously removed.