PIN-SPRING 5L4763 - Caterpillar

Illustration 1 g00800583
EMCP II+ (1) Generator set control+ (GSC+) (2) Upper display (3) Lower display (4) Alarm module (ALM) (5) Custom Alarm module (CAM) (6) Speed potentiometer (7) Start Aid switch (8) Voltage adjust rheostat (9) Caterpillar monitoring system control (10) Scroll switch (11) Display mode (12) Fault alarm indicators (13) Keypad (14) Emergency stop push button (ESPB) (15) Panel lights (16) Engine control switch (ECS) (17) "LH/RH switch"
Illustration 2 g00800584
EMS II (1) Display mode (2) Scroll switch (3) Display module (4) Engine oil pressure (5) Engine coolant temperature (6) Engine intake manifold pressure (7) Engine exhaust temperature (8) Reset push button (9) "LH/RH switch" (10) Battery monitor (11) Engine oil temperature (12) Engine inlet air temperature (13) Fuel pressure (14) Emergency stop push button (ESPB) (15) Engine control switch (ECS)EMCP II+
The EMCP II+ consists of the following components: Generator Set Control+ (GSC+), Instrument Panel, Alarm Module and Synchronizing Light Module. Refer to Illustration 1.Generator Set Control+ (GSC+)
The main component of the EMCP II+ system is the generator set control+ (GSC+) (1). The GSC+ is designed to operate when the GSC+ is powered by 24 VDC or 32 VDC. The GSC+ monitors the generator set. The GSC+ controls many of the functions of the generator set. The GSC+ has four main components: fault indicators, upper display, lower display and keypad.Fault Indicators
The ten fault indicators (12) are used in order to show a fault that is present. The ten fault indicators are also used to describe a fault that is present. The fault indicators are divided into four groups. The four groups are the fault alarm indicator, the spare fault indicators, the fault shutdown indicator and the dedicated shutdown indicators.Upper Display
The primary function of the upper display (2) is showing the following information of the generator output: AC voltage, current and frequency. Several options are available on the upper display for AC metering. These options can be viewed one at a time by pressing the AC Meter key on the keypad.Lower Display
The lower display (3) shows values for power metering, engine parameters and the relay status. The left side of the lower display serves as a power meter for the generator set.Keypad
The keypad (13) is used to control the information that is shown on upper display (2) and lower display (3). The seven keys have two sets of functions, normal functions and service functions. See the topic Systems Operation, "Service Mode" for a description of the service functions of the keys. The normal functions of the keys are described in the following paragraphs.Power Meter Key - This key controls