6E4614 PIN Caterpillar parts
554, 583T, 587R, 587T, 621F, 621G, 627F, 627G, 631G, 637G, 914G, 939C, 953C, 963C, 963D, 973C, CB-224C, CB-434B, CB-434C, CB-434D, CB-534B, CB-534C, CB-535B, CB-544, CB-634, CB-634C, CB-634D, D4C III,...
Rating:
Alternative (cross code) number:
CA6E4614
6E-4614
6E4614
CA6E4614
6E-4614
6E4614
Weight: 0.01 pounds 0 kg.
COMPACT WHEEL LOADER, WHEEL TRACTOR,
Compatible equipment models: 6E4614:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3939 Link Bracket 2 Start By:
Remove the electric starting motor.
Remove the flywheel.
Support the engine.
Illustration 1 g06002548
Remove bolts (2) and rear crankshaft seal (1).
Illustration 2 g06002556
Remove bolts (4) and the washers. Remove cover (3) and the seal.
Illustration 3 g06002558
Remove gear (7), bolts (6), and gear (5).
Illustration 4 g06002564
Remove O-ring seal (8) from gear (7).
Illustration 5 g06002568
Attach Tooling (A) and a suitable lifting device to flywheel housing (9). The weight of flywheel housing (9) is approximately 135 kg (297 lb).
Remove bolts (10) and flywheel housing (9).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 439-3939 Link Bracket 2
B - Loctite Anaerobic Flexible Gasket Maker -
C 095-0706 Bolt 2
Apply Tooling (B) to the face of the cylinder block.
Illustration 6 g06002568
Attach Tooling (A) and a suitable lifting device to flywheel housing (9). The weight of flywheel housing (9) is approximately 135 kg (297 lb). Position flywheel housing (9) on the rear of the cylinder block.
Install the washers and bolts (10).
Illustration 7 g06002564
Install O-ring seal (8) onto gear (7).
Illustration 8 g06002578
Install gear (5) and bolts (6).Note: Tooling (C) is for supporting gear (7) during the installation of the cover and the rear crankshaft seal.Note: The bolt holes in gear (7) are not symmetrical. When installing Tooling (C), check the rest of the bolts holes in gear (7) are aligned with the holes in the crankshaft.
Install gear (7) and Tooling (C).
Illustration 9 g06002581
Install cover (3), the seal, bolts (4), and the washers.
Illustration 10 g06002592
Install rear crankshaft seal (1) and bolts (2).
Remove Tooling (C).End By:
Install the flywheel.
Install the electric starting motor.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3939 Link Bracket 2 Start By:
Remove the electric starting motor.
Remove the flywheel.
Support the engine.
Illustration 1 g06002548
Remove bolts (2) and rear crankshaft seal (1).
Illustration 2 g06002556
Remove bolts (4) and the washers. Remove cover (3) and the seal.
Illustration 3 g06002558
Remove gear (7), bolts (6), and gear (5).
Illustration 4 g06002564
Remove O-ring seal (8) from gear (7).
Illustration 5 g06002568
Attach Tooling (A) and a suitable lifting device to flywheel housing (9). The weight of flywheel housing (9) is approximately 135 kg (297 lb).
Remove bolts (10) and flywheel housing (9).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 439-3939 Link Bracket 2
B - Loctite Anaerobic Flexible Gasket Maker -
C 095-0706 Bolt 2
Apply Tooling (B) to the face of the cylinder block.
Illustration 6 g06002568
Attach Tooling (A) and a suitable lifting device to flywheel housing (9). The weight of flywheel housing (9) is approximately 135 kg (297 lb). Position flywheel housing (9) on the rear of the cylinder block.
Install the washers and bolts (10).
Illustration 7 g06002564
Install O-ring seal (8) onto gear (7).
Illustration 8 g06002578
Install gear (5) and bolts (6).Note: Tooling (C) is for supporting gear (7) during the installation of the cover and the rear crankshaft seal.Note: The bolt holes in gear (7) are not symmetrical. When installing Tooling (C), check the rest of the bolts holes in gear (7) are aligned with the holes in the crankshaft.
Install gear (7) and Tooling (C).
Illustration 9 g06002581
Install cover (3), the seal, bolts (4), and the washers.
Illustration 10 g06002592
Install rear crankshaft seal (1) and bolts (2).
Remove Tooling (C).End By:
Install the flywheel.
Install the electric starting motor.
Cat SIS web machinery list:
Parts pin Caterpillar catalog:
4M6646
PIN-GROOVED
16, 1673C, 1693, 16G, 215, 229D, 245, 245B, 3208, 3304, 3306, 3306B, 3406, 3406B, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3508, 3508C, 3512, 3512B, 3516, 3516B, 5130, 5230, 527, 589, 594, 615, ...
16, 1673C, 1693, 16G, 215, 229D, 245, 245B, 3208, 3304, 3306, 3306B, 3406, 3406B, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3508, 3508C, 3512, 3512B, 3516, 3516B, 5130, 5230, 527, 589, 594, 615, ...
3B5317
PIN-COTTER
16M, 414E, 416B, 416C, 416D, 416E, 416F, 420D, 422E, 422F, 424D, 426C, 428, 428B, 428C, 428D, 428E, 428F, 430D, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 561B, 561C, 589,...
16M, 414E, 416B, 416C, 416D, 416E, 416F, 420D, 422E, 422F, 424D, 426C, 428, 428B, 428C, 428D, 428E, 428F, 430D, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 561B, 561C, 589,...
5H8985
PIN-SPRING
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
2M5795
PIN-CLEVIS
1390, 16, 215, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 313B, 320 L, 320B, 320B FM LL, 320C FM, 320D, 320D FM, 320N, 322, 322 FM L, 322 LN, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 3...
1390, 16, 215, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 313B, 320 L, 320B, 320B FM LL, 320C FM, 320D, 320D FM, 320N, 322, 322 FM L, 322 LN, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 3...
5L5711
PIN-SPRING
3406, 3406B, 3408, D343, D6H, D6H II, D6H XL, D6H XR, D6R, D6R STD, D7H, D7R XR, D8N, D8R, D9R, SE60 V XW
3406, 3406B, 3408, D343, D6H, D6H II, D6H XL, D6H XR, D6R, D6R STD, D7H, D7R XR, D8N, D8R, D9R, SE60 V XW
1687224
PIN-PISTON
120H, 120K, 120K 2, 12K, 135H, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 561N, 938G II, 953C, 963C, AP-755, C7, D5N, ...
120H, 120K, 120K 2, 12K, 135H, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 561N, 938G II, 953C, 963C, AP-755, C7, D5N, ...
4H4737
PIN
117, 118, 119, 16, 172, 183, 184, 30, 44, 46, 517, 527, 561H, 571G, 572G, 572R, 578, 583K, 583R, 583T, 587R, 587T, 589, 594, 613C, 613C II, 613G, 7155, 768B, 769, 824B, 936, 936F, 950B, 950B/950E, 950...
117, 118, 119, 16, 172, 183, 184, 30, 44, 46, 517, 527, 561H, 571G, 572G, 572R, 578, 583K, 583R, 583T, 587R, 587T, 589, 594, 613C, 613C II, 613G, 7155, 768B, 769, 824B, 936, 936F, 950B, 950B/950E, 950...
1324766
PIN-G.E.T.
312D, 312D L, 312D2 L, 315C, 317B LN, 318B, 318C, 320 L, 320B, 320C, 321D LCR, 322B L, 322B LN, 322C, 325B L, 325C, 330, 330 FM L, 950F, 950G, 953C, 963, 963C, M312, M315, M318, M320
312D, 312D L, 312D2 L, 315C, 317B LN, 318B, 318C, 320 L, 320B, 320C, 321D LCR, 322B L, 322B LN, 322C, 325B L, 325C, 330, 330 FM L, 950F, 950G, 953C, 963, 963C, M312, M315, M318, M320
8J0928
PIN
315C, 315D L, 3P, 3S, D3B, D3C, D3C III, D3G, D3K XL, D3K2 LGP, D4B, D4C, D4C II, D4C III, D4G, D4K XL, D4K2 XL, D5C, D5C III, D5G, D5K LGP, D5K2 XL
315C, 315D L, 3P, 3S, D3B, D3C, D3C III, D3G, D3K XL, D3K2 LGP, D4B, D4C, D4C II, D4C III, D4G, D4K XL, D4K2 XL, D5C, D5C III, D5G, D5K LGP, D5K2 XL
1368587
PIN-THREADED
5110B, 651E, 657G, 963C, 973C, 973D
5110B, 651E, 657G, 963C, 973C, 973D
1368586
PIN
5110B, 651E, 657G, 963C, 973D
5110B, 651E, 657G, 963C, 973D
3K9750
PIN
977, D6D, D6E, D6G, D6G SR, D6G2 XL
977, D6D, D6E, D6G, D6G SR, D6G2 XL
1270706
PIN
D6E, D6F SR, D6G SR
D6E, D6F SR, D6G SR
9W3254
PIN
D6D, D6E, D6F SR, D6G SR, D6G2 LGP, D6G2 XL, D7G, D7G2
D6D, D6E, D6F SR, D6G SR, D6G2 LGP, D6G2 XL, D7G, D7G2
1612114
PIN
D5M, D5N, D6K, D6K LGP, D6K XL
D5M, D5N, D6K, D6K LGP, D6K XL
2159366
PIN AS
963C, 963D
963C, 963D
1907685
PIN-DOWEL
963C
963C
1907683
PIN-DOWEL
963C
963C
1907679
PIN
963C
963C
1717152
PIN
963C, 973C
963C, 973C
1237582
PIN-THREADED
554, 583T, 587R, 587T, 621F, 621G, 627F, 627G, 631G, 637G, 953C, 953D, 963C, 963D, 973C, CB-534D, CB-544, CB-545, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D7E, D8R, D8R II, D8T, HA771, HA871, PF-290...
554, 583T, 587R, 587T, 621F, 621G, 627F, 627G, 631G, 637G, 953C, 953D, 963C, 963D, 973C, CB-534D, CB-544, CB-545, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D7E, D8R, D8R II, D8T, HA771, HA871, PF-290...