PIN-5/8 6K0831 - Caterpillar

Image1.10.1
12. Remove 7X-0873 Tee (17) part of 148-8430 Tee As. and 6V-9007 Elbow (42) part of 148-8347 Elbow As. both part of 274-7854 Accumulator Mounting Gp. See Image 1.11.1.
Image1.11.1
13. Assemble 8T-6684 Elbow (27) to 228-6815 Accumulator Charging Valve Gp (43) using one 3D-2824 O-Ring Seal (22). Assemble one 8T-4834 Tee (44) to 8T-6684 Elbow (27) using one 5K-9090 O-Ring Seal (35). Leave all fittings loose. Assemble 328-8782 Hose As. (45) loosely to 6V-9840 Tee (36) using one 5K-9090 O-Ring Seal (35). Assemble 328-8782 Hose As. (45) to 8T-4834 Tee (44) using one 5K-9090 O-Ring Seal (35). Clip 328-8782 Hose As. (45) to 282-9499 Hose As. (46) part of 229-2094 Power Train Oil Lines Gp using one 5P-7468 Clip (47), one 5P-7469 Clip (48), one 5P-8444 Grommet (49), and one 8T-4186 Bolt (13), two 8T-4121 Washer (14), one 8T-4133 Nut (7) from Step 3. Tighten 8T-4186 Bolt (13) to 55 Nm +/- 10 Nm (41 lb-ft +/- 7 lb-ft). Tighten 8T-6684 Elbow O-Ring Port Seal to 175 Nm +/- 15 Nm (129 lb-ft +/- 11 lb-ft). Tighten 8T-4834 Tee O-Ring Face Seal to 130 Nm +/- 15 Nm (96 lb-ft +/- 11 lb-ft). Tighten both ends of 328-8782 Hose As. (45) to 130 Nm +/- 15 Nm (96 lb-ft +/- 11 lb-ft). See Image 1.12.1 and 1.12.2.
Image1.12.1
Image1.12.2
14. Remove 6V-3965 Nipple As. (50) and 6V-0852 Cap (51) from 7X-0873 Tee (17) and assemble to 8T-4834 Tee (44) using one 3J-1907 O-Ring Seal (52). Tighten 6V-3965 Nipple As. O-Ring Face Seal to 15 Nm +/- 2 Nm (11 lb-ft +/- 1 lb-ft). See Image 1.11.1 and 1.12.1.
15. Assemble 144-5194 Hose As. (55) to 6V-9007 Elbow (42) part of 148-8347 Elbow As. part of 236-7266 Torque Converter Lines Gp and 6V-8640 Connector (54) on 281-4029 Tube As. part of 229-2094 Power Train Line Gp using two 6V-9746 O-Ring Seal (24). Tighten both ends of 144-5194 Hose As. (55) to 90 Nm +/- 9 Nm (66 lb-ft +/- 7 lb-ft). See Image 1.14.1 and 1.4.1.
Image1.14.1
16. Inspect service brake oil filtration system for any leaks. Observe all hydraulic tank sight gauges in order to ensure that the system is refilled to the proper level. Add fluid as required in accordance with the Operation and Maintenance Manual refill capacities. Remove all tools from machine.