6K7324 PIN Caterpillar parts
988
Rating:
Alternative (cross code) number:
CA6K7324
6K-7324
6K7324
CA6K7324
6K-7324
6K7324
Weight: 50 pounds 22 kg.
Information:
EFFECTIVE LENGTH
69.09
mm
HEAD OD
0
mm
OVERALL LENGTH
371.35
mm
PIN OD
101.56
mm
TRANSV HOLES
Y
DETENT BALL
N
END TYPE A
LEAD TAPER
END TYPE B
LEAD TAPER
GROOVE
N
HAND RING
N
HEAD THICKNESS
0
KEEPER SLOT
N
LUBE OUTLETS
Y
COATING/PLATING
1E0586
THREAD SIZE MAX
1.25-12
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$208.61
10 Aug 2023
US: Florida-Parts-Z
6K7324 - PIN 4K1555 fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$140.34
26 Apr 2021
50.7063[22.82] Pounds
US: IronDT
6K7324 Pin Fits Caterpillar
TCP Warranty
TCP Warranty
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 6K7324:
Information:
Probable Causes
Injector sleeve or injector sleeve sealRecommended Actions
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.
Table 1
Troubleshooting Test Steps Values Results
1. Check the Injector Sleeves and the Injector Sleeve Seals
A. Remove the valve mechanism covers.
B. Remove the fuel injectors from the cylinder head. Refer to the Disassembly and Assembly manual for details.
C. Pressurize the cooling system in order to identify the injector sleeve that is leaking. Closely inspect the sealing joint around the top of the injector sleeve. Small amounts of coolant will be dripping from the injector sleeve that is leaking.
Note: Do not allow the pressure on the cooling system to exceed 103 kPa (15 psi) during the test. Damage to the cooling system may result from applying excessive pressure.
D. Remove the injector sleeve that is leaking. Carefully inspect the sleeve for damage. If there are visible signs of damage to the injector sleeve, replace the sleeve. Replace the O-ring seals for the injector sleeve and reinstall the sleeve. Replace any damaged components.
Note: Coolant may also be contaminating the fuel system. After the engine is shutdown, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may cause damage to injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Injector Sleeves and the Injector Sleeve Seals
Result: The injector sleeves and the injector sleeve seals are OK.
Return the unit to service.
Result: The injector sleeves and the injector sleeve seals are NOT OK.
Repair: Replace the injector sleeves and injector sleeve seals.
Injector sleeve or injector sleeve sealRecommended Actions
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.
Table 1
Troubleshooting Test Steps Values Results
1. Check the Injector Sleeves and the Injector Sleeve Seals
A. Remove the valve mechanism covers.
B. Remove the fuel injectors from the cylinder head. Refer to the Disassembly and Assembly manual for details.
C. Pressurize the cooling system in order to identify the injector sleeve that is leaking. Closely inspect the sealing joint around the top of the injector sleeve. Small amounts of coolant will be dripping from the injector sleeve that is leaking.
Note: Do not allow the pressure on the cooling system to exceed 103 kPa (15 psi) during the test. Damage to the cooling system may result from applying excessive pressure.
D. Remove the injector sleeve that is leaking. Carefully inspect the sleeve for damage. If there are visible signs of damage to the injector sleeve, replace the sleeve. Replace the O-ring seals for the injector sleeve and reinstall the sleeve. Replace any damaged components.
Note: Coolant may also be contaminating the fuel system. After the engine is shutdown, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may cause damage to injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Injector Sleeves and the Injector Sleeve Seals
Result: The injector sleeves and the injector sleeve seals are OK.
Return the unit to service.
Result: The injector sleeves and the injector sleeve seals are NOT OK.
Repair: Replace the injector sleeves and injector sleeve seals.
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
1150, 1160, 120G, 12E, 12F, 12G, 130G, 140, 140G, 14E, 14G, 16, 1673, 1693, 16G, 173B, 183B, 225, 245, 3116, 3126, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3412, 3412C, 3508, ...
118, 119, 120, 120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 129, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 1...
10, 120, 120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 127, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14G, 14H...
10 FT, 10B, 117, 118, 119, 128, 129, 140, 16, 172, 184, 235, 245, 245B, 24M, 2670C, 30, 303E CR, 305.5E, 308E, 308E CR, 3160, 35, 414E, 416C, 416E, 420D, 420E, 420F, 422E, 426C, 428C, 428E, 428F, 430E...
120G, 12G, 130G, 140G, 14G, 14H, 14H NA, 16, 160G, 1693, 16G, 16H, 16H NA, 215, 225, 235, 245, 3304, 3306, 3406, 3408, 508, 594, 613C, 615, 621, 621B, 623B, 627, 627B, 627E, 627F, 627G, 627H, 627K, 62...
16, 1693, 594, 657, 769, 955C, 977H, 977K, 977L, 988, CS-323, D315, D326F, D337, D337F, D343, D353C, D364, D375D, D379, D379A, D397D, D9E, D9G, G353D, G379
10 FT, 10B, 117, 118, 119, 120, 120B, 127, 129, 12E, 12F, 140, 140B, 141, 14E, 153, 16, 163, 172, 183, 184, 191, 227, 24, 25, 30, 3508, 3512, 3516, 44, 46, 515, 525, 525B, 525C, 535B, 535C, 545, 545C,...
119, 120H, 120H ES, 120H NA, 120K, 120K 2, 128, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H ...
633, 966C, 977, 977K, 977L, 980, 980B, 983, 988
12E, 16, 988
980, 980B, 988
988
7K3050
PIN
950, 966C, 980B
950, 966C, 980B
980, 980B
980, 980B
980, 980B
980, 980B
980, 980B
6K7329
PIN
988
988
6K7325
PIN
988
988
6K6002
PIN
988
988