PIN 6V3126 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-5934 Seal Installer 1
B 138-7576 Link Bracket 2
C 6V-2012 Depth Micrometer 1
D 9S-3263 Thread Lock Compound 1 Note: Check all of the O-ring seals and the components for wear or for damage. Replace the components, if necessary. Lubricate all of the O-ring seals lightly with the lubricant that is being sealed. Clean all of the components with a cloth that is free of loose material (lint).
Illustration 1 g00648279
Cool roller bearing cups (2) to a temperature of −40 °C (−40 °F). Install one roller bearing cup (2) on each side of front wheel (3). Make sure that the roller bearing cups are seated properly in the counterbore of the front wheel.
Use Tooling (A) in order to install the outer half of Duo-Cone seal (1) in front wheel (3). Refer to Disassembly and Assembly, "Duo-Cone Seals - Install".
Illustration 2 g00648281
Position the O-ring seal (not shown) on retainer (4). Install retainer (4) on the spindle.
Use Tooling (A) (not shown) in order to install the inner half of Duo-Cone seal in retainer (4). Refer to Disassembly and Assembly, "Duo-Cone Seals - Install".
Install roller bearing cone (5) on the spindle.
Illustration 3 g00694860
Attach Tooling (B) to front wheel assembly (3). Position a suitable lifting sling on Tooling (B). Secure the suitable lifting sling