7D3009 PIN Caterpillar parts
772, 772B, 773, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 776, 776C, 776D, 777, 777B, 777D, 777F, 777G
Rating:
Alternative (cross code) number:
CA7D3009
7D-3009
7D3009
CA7D3009
7D-3009
7D3009
Weight: 10 pounds 4 kg.
Information:
ID
23
mm
MATERIAL THICKNESS
184.15
mm
OD
69.76
mm
QUARRY TRUCK, WAGON,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$219.38
16 Oct 2023
US: FinditParts Inc
7D3009 - PIN fits Caterpillar (CAT)
BLUMAQ 7D3009 - PIN fits Caterpillar (CAT)
BLUMAQ 7D3009 - PIN fits Caterpillar (CAT)
Compatible equipment models: 7D3009:
Information:
Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-9906     Ratchet Puller     1    
B     5P-7307     Engine Turning Tool     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00791413
Put fan (1) in position in the generator housing. Ensure that holes (2) are toward the outside.
Install guide bolt (4) in the hub.
Check the thickness of the plates that are installed over shims (3). The thickness of shims (3) and the plates must be 12.116 0.406 mm (0.4770 0.0160 inch). Add or subtract shims (3) in order to get the correct thickness.
Illustration 2 g00791423
Install plates (5) on the hub. Remove the guide bolt and install the bolts that hold the shims and plates in position.
Illustration 3 g00791425
Remove the cover from the flywheel housing and install Tool (B) .
Illustration 4 g00791429
Note: G3412 Engines do not have mounts (8) .
Install the NC guide bolt in the flywheel.
Fasten a Tool (A) and strap (6) to the generator. Fasten a chain to the lifting bracket on the front of the generator. Put the generator in place on the engine. The weight of the generator is approximately 1134 kg (2500 lb).Note: Use Tool (B) to put the guide bolt in the flywheel housing. Align the holes in the plates and in the fan on the generator.
Illustration 5 g00791439
Install bolts (10) that hold fan (9 ) in position on the flywheel. Remove the guide bolt and install the bolt.
Install the bolts that hold the generator housing to the flywheel housing.
Illustration 6 g00791465
Lift the generator and the engine in order to remove wood blocks (11). Lower the generator and the engine onto mounts (8) .
Install the four bolts that hold the generator in place on the base.
Illustration 7 g00791467
Tighten bolts (17) on the front engine support.
Illustration 8 g00791471
Remove cardboard (18) from in between the stator and the rotor assembly .
Illustration 9 g00791475
Install louver (19) and cover (20) .
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-9906     Ratchet Puller     1    
B     5P-7307     Engine Turning Tool     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00791413
Put fan (1) in position in the generator housing. Ensure that holes (2) are toward the outside.
Install guide bolt (4) in the hub.
Check the thickness of the plates that are installed over shims (3). The thickness of shims (3) and the plates must be 12.116 0.406 mm (0.4770 0.0160 inch). Add or subtract shims (3) in order to get the correct thickness.
Illustration 2 g00791423
Install plates (5) on the hub. Remove the guide bolt and install the bolts that hold the shims and plates in position.
Illustration 3 g00791425
Remove the cover from the flywheel housing and install Tool (B) .
Illustration 4 g00791429
Note: G3412 Engines do not have mounts (8) .
Install the NC guide bolt in the flywheel.
Fasten a Tool (A) and strap (6) to the generator. Fasten a chain to the lifting bracket on the front of the generator. Put the generator in place on the engine. The weight of the generator is approximately 1134 kg (2500 lb).Note: Use Tool (B) to put the guide bolt in the flywheel housing. Align the holes in the plates and in the fan on the generator.
Illustration 5 g00791439
Install bolts (10) that hold fan (9 ) in position on the flywheel. Remove the guide bolt and install the bolt.
Install the bolts that hold the generator housing to the flywheel housing.
Illustration 6 g00791465
Lift the generator and the engine in order to remove wood blocks (11). Lower the generator and the engine onto mounts (8) .
Install the four bolts that hold the generator in place on the base.
Illustration 7 g00791467
Tighten bolts (17) on the front engine support.
Illustration 8 g00791471
Remove cardboard (18) from in between the stator and the rotor assembly .
Illustration 9 g00791475
Install louver (19) and cover (20) .
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
8D7047
PIN-TREADLE
621F, 623E, 623F, 627F, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776D, 777, 777B, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 994
621F, 623E, 623F, 627F, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776D, 777, 777B, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 994
6G7773
PIN
769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G, 773G LRC, 775B, 775D, 775E, 775F, 775G, 775G LRC, 776C, 777, 777B, 777D, 777F, 777G, 785, 785B, 785C, 78...
769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G, 773G LRC, 775B, 775D, 775E, 775F, 775G, 775G LRC, 776C, 777, 777B, 777D, 777F, 777G, 785, 785B, 785C, 78...
8X0573
PIN
776C, 776D, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D
776C, 776D, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D
8W8454
PIN AS
776C, 777B, 777D, 777F, 777G
776C, 777B, 777D, 777F, 777G
9D2278
PIN
776, 776C, 776D, 777, 777B, 777D, 777F, 777G
776, 776C, 776D, 777, 777B, 777D, 777F, 777G
8X1847
PIN
776C, 776D, 777, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D
776C, 776D, 777, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D
5T9266
PIN AS
776C, 777B, 777D, 777F, 777G
776C, 777B, 777D, 777F, 777G
1326650
PIN AS
769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G, 773G LRC, 775B, 775D, 775E, 775F, 775G, 775G LRC, AD30, AD45B, AD55
769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G, 773G LRC, 775B, 775D, 775E, 775F, 775G, 775G LRC, AD30, AD45B, AD55
8W1367
PIN AS
770, 772, 773B, 773D, 773E, 773F, 773G, 773G LRC, 775B, 775D, 775E, 775F, 775G, 775G LRC, AD40, AD45, AD55, AD55B, AD60
770, 772, 773B, 773D, 773E, 773F, 773G, 773G LRC, 775B, 775D, 775E, 775F, 775G, 775G LRC, AD40, AD45, AD55, AD55B, AD60
6D1303
PIN
768B, 768C, 769, 769C, 769D, 771C, 771D, 773, AD40, AE40
768B, 768C, 769, 769C, 769D, 771C, 771D, 773, AD40, AE40
7D8922
PIN
69D, 768B, 769C, 769D, 770, 771C, 771D, 772, 772B, 773, 773B, 773E, 773F, 775F
69D, 768B, 769C, 769D, 770, 771C, 771D, 772, 772B, 773, 773B, 773E, 773F, 775F
8W8419
PIN AS
769C, 771C, 773B, 775B
769C, 771C, 773B, 775B
7D3029
PIN-THRUST
69D, 768C, 769, 769C, 769D, 771C, 771D, 772, 772B, 773, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776C, 776D, 777, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, AD40, AD45, AD45B, AE40, AE40 II...
69D, 768C, 769, 769C, 769D, 771C, 771D, 772, 772B, 773, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776C, 776D, 777, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, AD40, AD45, AD45B, AE40, AE40 II...
8X5856
PIN AS
776C, 777B, 784B, 784C, 785, 785B, 785C, 789, 789B, 793, 793B, 793C
776C, 777B, 784B, 784C, 785, 785B, 785C, 789, 789B, 793, 793B, 793C
8X5854
PIN-BEARING
776C, 777B, 784B, 784C, 785, 785B, 785C, 789, 789B, 793, 793B, 793C
776C, 777B, 784B, 784C, 785, 785B, 785C, 789, 789B, 793, 793B, 793C
8X5853
PIN-BEARING
776C, 777B, 784B, 784C, 785, 785B, 785C, 789, 789B, 793, 793B, 793C
776C, 777B, 784B, 784C, 785, 785B, 785C, 789, 789B, 793, 793B, 793C
5T8098
PIN
769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777D, 784B, 785, 785B, 789, 789B, 793B, 793C, AD40, AD45, AE40
769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777D, 784B, 785, 785B, 789, 789B, 793B, 793C, AD40, AD45, AE40
2370417
PIN AS
793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
8W8454
PIN AS
776C, 777B, 777D, 777F, 777G
776C, 777B, 777D, 777F, 777G
2G2985
PIN
776, 776C, 776D, 777B
776, 776C, 776D, 777B
9D7462
PIN
772, 772B, 776, 776C, 776D, 777B
772, 772B, 776, 776C, 776D, 777B
9D7461
PIN
772, 772B, 776, 776C, 776D, 777B
772, 772B, 776, 776C, 776D, 777B
1069612
PIN-RETAINING
772B, 773B, 773D, 775B, 775D, 776C, 776D, 777D, 784B, 784C, 785, 785B, 785C, 789B, 789C, 793B, 793C
772B, 773B, 773D, 775B, 775D, 776C, 776D, 777D, 784B, 784C, 785, 785B, 785C, 789B, 789C, 793B, 793C
8X0573
PIN
776C, 776D, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D
776C, 776D, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D