PIN 7J7067 - Caterpillar

Illustration 26 g00847259
Typical ExampleNote: Use the hoist and chains in order to relieve pressure from the lower hitch pin during removal.
Use Tooling (E) in order to remove hitch pin (39) .
Illustration 27 g00847262
Remove lower spacer (40) from the lower hitch.
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the correct procedure.
Illustration 28 g00283523
Use a suitable lift truck and the hoist in order to carefully separate the loader frame from the rear frame.
Illustration 29 g00877528
Position wood blocks under the loader frame, as shown.
Illustration 30 g00847264
Mark the radial position of upper cap (42). Remove bolts (41), the washers, and upper cap (42) from the upper hitch.
Illustration 31 g00847266
Mark the radial position of lower cap (43). Remove lower cap (43) from the upper hitch.
Illustration 32 g00847268
Remove shim pack (44) .
Illustration 33 g00361295
Use Tooling (F) in order to remove the bearing cups from the upper hitch of the front loader frame.
Illustration 34 g00847272
Remove lip seal (45) from lower cap (43) .
Remove lip seal (46) from upper cap (42) .
Illustration 35 g00847274
Use Tooling (G) in order to remove lower sleeve bearing (47) from the upper hitch of the rear frame.
Illustration 36 g00847276
Use Tooling (G) in order to remove upper sleeve bearing (48) from the upper hitch of the rear frame.
Illustration 37 g00847280
Remove upper spacer (49) .
Mark the radial position of upper cap (51) and lower cap (52). Remove bolts (50), the washers, upper cap (51), and lower cap (52) from the lower hitch.
Illustration 38 g00847282
Remove shim pack (53) .
Illustration 39 g00847284
Remove lip seal (54) from upper cap (51) .
Remove lip seal (55) from lower cap (52) .
Illustration 40 g00361302
Use Tooling (H) in order to remove the bearing cups and the bearing cones from the lower hitch.