PIN 7K5213 - Caterpillar

Remove Engine Oil Cooler
1. Remove the coolant from the engine.2. Remove the oil from the oil cooler. 3. Disconnect turbocharger lubrication valve tube assembly (1) from the tube assembly fitting. 4. Remove two bolts (2) and clamp (3). Remove two bolts (4) that hold elbow to tee and two bolts (5) that hold bracket to the engine block. 5. Remove four bolts (7) and gasket that fastens oil cooler elbow (6) to the water pump. 6. Remove clamp (8) from tube assembly. 7. Remove two nuts (10) that hold the oil cooler support to block.8. Remove three bolts (9) that fasten flange to the flywheel housing.9. Use two persons to remove the engine oil cooler from the engine. Weight of the cooler is 90 lb. (41 kg).Install Engine Oil Cooler
1. Inspect all O-ring seals and gaskets. Make replacements if needed.2. Use two persons to put the oil cooler in position on the engine. 3. Install two nuts (4) that hold the support to the block.4. Install the three bolts that hold the flange (1) to the flywheel housing.5. Install gasket and four bolts to hold elbow (3) in position on the water pump.6. Install tube assembly (2) from the turbo-charger lubrication valve to elbow fitting. 7. Install two bolts that hold bracket (6) to block. Install two bolts to fasten elbow (5) to tee. Put clamp in position and install two bolts to hold it in position. 8. Install elbow and clamp (7) for oil line from the oil filter housing to the oil cooler.9. Fill the engine with coolant.10. Add oil to engine as needed.Disassemble Engine Oil Cooler
start by:a) remove engine oil cooler1. Put identification on support and elbow for assembly purposes. 2. Remove bolts (1), support (2) and gasket from core assembly. 3. Remove bolts (6), bracket (3), two spacers (5), gasket and elbow (4) from the core assembly. 4. Clean the tubes of the engine oil cooler core with a .156 in. (3.96 mm) diameter rod.Assemble Engine Oil Cooler
1. Install the gasket, elbow (2), bracket (1) and two spacers on the oil cooler core assembly. 2. Install gasket and support (3) to core assembly as shown.end bya) install engine oil cooler