PIN 8D7095 - Caterpillar

Illustration 1 g03112277
Left side view of engine.
Table 1
Specification for 237-7959 Cylinder Block Gp and 383-7227 Cylinder Block Gp
Item Qty Part Specification Description
The camshaft bearings from the rear surface of the cylinder block are the following dimensions:
The oil holes must be aligned at the correct angle when the bearings are installed. Refer to Specifications, "Cylinder Block" for the correct angle.
A - - Distance from rear face of cylinder block is 1120.0 1.5 mm (44.09 0.06 inch).
B - - Distance from rear face of cylinder block is 850.0 1.5 mm (33.46 0.06 inch).
C - - Distance from rear face of cylinder block is 580.0 1.5 mm (22.83 0.06 inch).
D - - Distance from rear face of cylinder block is 310.0 1.5 mm (12.20 0.06 inch).
E - - Distance from rear face of cylinder block is 40.0 1.5 mm (1.58 0.06 inch).