PIN 8D7225 - Caterpillar

Illustration 1 g03542548
Illustration 2 g03542549
Table 1
Specifications for 240-7271 Cylinder Block Gp and 361-5592 Cylinder Block Gp
Item Qty Part Specification Description
1 6 437-1409 Liner Seal Before assembly, apply 5P-3975 Rubber Lubricant.
2 6 197-9330 Cylinder Block Liner Bore diameter in the cylinder block for cylinder block liner:
Dimension (B) is 151.50 0.03 mm (5.965 0.001 inch).
Dimension (C) is 149.80 0.30 mm (5.898 0.012 inch).
Dimension (D) is 148.00 0.03 mm (5.827 0.001 inch).
Dimension (E) is 141.90 0.15 mm (5.587 0.111 inch).
- - - The flatness of the top contact surface of the cylinder block must be within 0.05 mm (0.002 inch) for any 150 mm (5.9 inch) section of the surface.
3 5 4F-5695 Cup Plug Before assembly, apply High Strength or High Temperature Anaerobic Flange Sealant to the bores.
Installation depth is 1.25 0.25 mm (0.049 0.010 inch).
Illustration 3 g03542550
Table 2
Item Qty Part Specification Description
F - - Bore for camshaft bearing is 85.000 0.015 mm (3.3465 0.0006 inch).
G - - Distance from the centerline of the crankshaft bore to the top surface of the cylinder block is 387.00 mm (15.236 inch).
4 3 3B-0623 Cup Plug Before assembly, apply High Strength or High Temperature Anaerobic Flange Sealant to the bores.
Installation depth is 1.25 0.25 mm (0.049 0.010 inch).
H - - Bore in the cylinder block for the main bearing is 116.000 0.013 mm (4.5669 0.0005 inch).
J - - Distance from the centerline of the crankshaft bore to the bottom surface of the cylinder block is 120.0 mm (4.72 inch).
K 7 207-8572 Bearing Cap Width in the cylinder block for main bearing cap is 177.96 mm (7.006 inch).
Width of the bearing cap (L) is 178.0 mm (7.01 inch).
5 14 223-6546 Bolt Refer to the Disassembly and Assembly manual for the installation procedure.
Illustration 4 g03542551
Table 3
Item Qty Part Specification Description
- Install the camshaft bearings into the cylinder block at the location specified. The distance that is listed below is measured from the front face of the cylinder block.
- - - Dimension (M) is 970.5 0.5 mm (38.21 0.02 inch).
- - - Dimension (N) is 816.5 0.5 mm (32.15 0.02 inch).
- - - Dimension (P) is 660.5 0.5 mm (26.00 0.02 inch)