8K3714 PIN ASSEM. Caterpillar parts
235, 235B, 235C, 235D
Rating:
Alternative (cross code) number:
CA8K3714
8K-3714
8K3714
CA8K3714
8K-3714
8K3714
Weight: 38 pounds 17 kg.
EXCAVATOR,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
$159.30
15 Apr 2022
US: Florida-Parts-Z
8K3714 - PIN ASSEM. fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$108.10
17 Jun 2022
38.0738[17.13] Pounds
US: ProperBuy
CTP Caterpillar Pin a (8k3714)
CTP
CTP
14 Nov 2020
-: -
8K3714 Pin Fits Caterpillar
8K3714 Pin
8K3714 Pin
Number on catalog scheme:
3
For full view, you need register
Cat SIS web machinery list:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9082 Engine Turning Tool 1
B 8T-3052 Degree Wheel 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Install the connecting rod bearings dry when clearance checks are performed. Refer to Disassembly and Assembly, "Bearing Clearance - Check". Apply clean engine oil on the connecting rod bearings for final assembly.
Illustration 1 g00998730
Use Tooling (A) to rotate the crankshaft until the connecting rod journal is at the bottom center.
Install a new lower half connecting rod bearing (3) in connecting rod bearing cap (2). Note: Ensure that bearing locking tab (4) is located in the notch of the connecting rod bearing cap.
Install a new upper half connecting rod bearing in the connecting rod. Note: Ensure that the bearing locking tab is located in the notch of the connecting rod.
Pull the connecting rod onto the crankshaft.
Illustration 2 g01149651
Position connecting rod bearing cap (2) on the connecting rod. Note: Ensure that the number on the side of the connecting rod bearing cap is on the same side as the number on the connecting rod. The bearing tabs of the connecting rod bearing cap and the connecting rod are located on the side opposite of the piston cooling jet.
Lubricate the threads of bolts (1) with clean engine oil. Install the bolts.
Tighten bolts (1), as follows:
Tighten Bolt (A) and Bolt (C) to a torque of 70 4 N m (52 3 lb ft).
Tighten Bolt (B) and Bolt (D) to a torque of 70 4 N m (52 3 lb ft).
Turn Bolt (B) and Bolt (D) for an additional 60 5 degrees (1/6 turn). Note: If Tooling (B) is not used, place an index mark on each bolt.
Tighten Bolt (A) and Bolt (C) again to a torque of 70 4 N m (52 3 lb ft).
Tighten Bolt (A) and Bolt (C) for an additional 60 5 degrees (1/6 turn). Note: If Tooling (B) is not used, place an index mark on each bolt.
Rotate the crankshaft in order to ensure that the crankshaft turns freely. End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9082 Engine Turning Tool 1
B 8T-3052 Degree Wheel 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Install the connecting rod bearings dry when clearance checks are performed. Refer to Disassembly and Assembly, "Bearing Clearance - Check". Apply clean engine oil on the connecting rod bearings for final assembly.
Illustration 1 g00998730
Use Tooling (A) to rotate the crankshaft until the connecting rod journal is at the bottom center.
Install a new lower half connecting rod bearing (3) in connecting rod bearing cap (2). Note: Ensure that bearing locking tab (4) is located in the notch of the connecting rod bearing cap.
Install a new upper half connecting rod bearing in the connecting rod. Note: Ensure that the bearing locking tab is located in the notch of the connecting rod.
Pull the connecting rod onto the crankshaft.
Illustration 2 g01149651
Position connecting rod bearing cap (2) on the connecting rod. Note: Ensure that the number on the side of the connecting rod bearing cap is on the same side as the number on the connecting rod. The bearing tabs of the connecting rod bearing cap and the connecting rod are located on the side opposite of the piston cooling jet.
Lubricate the threads of bolts (1) with clean engine oil. Install the bolts.
Tighten bolts (1), as follows:
Tighten Bolt (A) and Bolt (C) to a torque of 70 4 N m (52 3 lb ft).
Tighten Bolt (B) and Bolt (D) to a torque of 70 4 N m (52 3 lb ft).
Turn Bolt (B) and Bolt (D) for an additional 60 5 degrees (1/6 turn). Note: If Tooling (B) is not used, place an index mark on each bolt.
Tighten Bolt (A) and Bolt (C) again to a torque of 70 4 N m (52 3 lb ft).
Tighten Bolt (A) and Bolt (C) for an additional 60 5 degrees (1/6 turn). Note: If Tooling (B) is not used, place an index mark on each bolt.
Rotate the crankshaft in order to ensure that the crankshaft turns freely. End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Parts pin Caterpillar catalog:
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 215, 215B, 224B, 235B, 235D, 320 L, 325 L, 950, 950B, 950F, 950G, 951B, 955L, 962G, 963, 966C, E140, E200B
235, 235B, 235C, 986H
120K, 120M, 120M 2, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14G, 14H, 14H...
12G, 140B, 229, 229D, 235B, 963, D5M, E70B
235, 345B L, 973, 973C, 977K, 977L, D7F, D7G, D7G2
229, 235C, 322B L, 325, 325 LN, 325B L, 330, 330B L, 980F, 988B, 988F, 988F II, E300
235C
235C, 325D FM, 325D FM LL, 330C, 330C FM, 330D FM, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 36...
231D, 235, 235C
235, 245, 245D, 330 L, 350, 990, 990 II, 992C
235B, 235C, 235D
235, 235C
213B, 227, 235, 980C
231D, 235, 235C
235, 235B, 235C, 235D
2D6006
PIN
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 215, 2...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 215, 2...
8K1255
PIN
215, 215D, 225, 227, 229, 235, 235B, 235C, 245, 515, 518, 518C, 525, 545, 931B, 931C II, 933, 933C, 939, 939C, 950F II, D3C II, D3C III, D3G, D4C, D4C III, D4G, D5B, D5C III, D5G, D6D, D6G2 LGP, D6G2 ...
215, 215D, 225, 227, 229, 235, 235B, 235C, 245, 515, 518, 518C, 525, 545, 931B, 931C II, 933, 933C, 939, 939C, 950F II, D3C II, D3C III, D3G, D4C, D4C III, D4G, D5B, D5C III, D5G, D6D, D6G2 LGP, D6G2 ...
8K2956
PIN
225
225
225, 227, 231D, 235, 955K, 955L, D6C, D6D, D6G2 XL
225, 227, 231D, 235, D6C, D6D
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
235
235, 235B, 235C