PIN 8V5901 - Caterpillar

Removal Procedure
Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Ensure that the engine can not be started while this maintenance is being performed. To help prevent possible injury, do not use the starting motor to turn the flywheel.Hot engine components can cause burns. Allow additional time for the engine to cool before measuring/adjusting valve lash clearance.
Note: Put identification marks on all lines and on all hoses for installation purposes. Plug all lines, all hoses, and all tubes. This helps to prevent debris from entering the system.
Illustration 1 g00498335
Loosen two clamps (1) from hose (2) .
Remove hose (2) from air cleaner (3) .
Illustration 2 g00498339
Loosen clamp (4) and remove hose (5) from air cleaner (3) .
Remove line (6) from air cleaner (3) .
Illustration 3 g00498362
Remove the bolt and washer (7) .
Remove air filter indicator (8) .
Illustration 4 g00498366
Remove four bolts and washers (9) .
Remove air cleaner (3) from the machine.Installation procedure
Illustration 5 g00498366
Install air cleaner (3) to the machine.
Install washers and four bolts (9) .
Illustration 6 g00498362
Install air filter indicator (8) .
Install the washer and bolt (7) .
Illustration 7 g00498339
Install line (6) to air cleaner (3) .
Install hose (5) to air cleaner (3) and tighten clamp (4) .
Illustration 8 g00498335
Install hose (2) to air cleaner (3) and tighten two clamps (1) .End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".