8W6493 PIN Caterpillar parts
16G, 16H, 16H NA
Rating:
Alternative (cross code) number:
CA8W6493
8W-6493
8W6493
CA8W6493
8W-6493
8W6493
Weight: 6 pounds 2 kg.
MOTOR GRADER,
Related part:
8W6493
PIN-AXLE-YM
3951320
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$53.71
27 Feb 2022
US: Florida-Parts-Z
8W6493 - PIN fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$43.00
02 Feb 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar PIN 8W6493 New
$42.16
07 Mar 2022
6.6138[2.98] Pounds
US: IronDT
8W6493 Pin Fits Caterpillar
TCP Warranty
TCP Warranty
Number on catalog scheme:
27
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02229293
Disconnect harness assembly (2).
Remove bolt (1) and crankshaft position sensor (3).
Remove the O-ring seal from crankshaft position sensor (3). Installation Procedure
Install crankshaft position sensor (3) in reverse order of removal.
Install a new O-ring seal on crankshaft position sensor (3). Lubricate the O-ring seal with clean engine oil.
Install crankshaft position sensor (3) in the front housing. Install bolt (3). Tighten bolt (3) to a torque of 28 7 N m (21 5 lb ft).
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02229293
Disconnect harness assembly (2).
Remove bolt (1) and crankshaft position sensor (3).
Remove the O-ring seal from crankshaft position sensor (3). Installation Procedure
Install crankshaft position sensor (3) in reverse order of removal.
Install a new O-ring seal on crankshaft position sensor (3). Lubricate the O-ring seal with clean engine oil.
Install crankshaft position sensor (3) in the front housing. Install bolt (3). Tighten bolt (3) to a torque of 28 7 N m (21 5 lb ft).
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
16G, 16H, 16H NA
16G, 16H, 16H NA
16G, 16H, 16H NA
16G, 16H, 16H NA
16G, 16H, 16H NA
16G, 16H, 16H NA, 16M
16H, 16H NA, 16M
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H, 16H NA, 16M
14G, 16G
14G, 16G
14G, 16G
16G
16G, 16H, 16H NA
16G
16G
16G, 16H, 16H NA
2G8619
PIN
16G
16G
16G
16G, 16H, 16H NA
16G, 16H, 16H NA
16G, 16H, 16H NA
2G9325
PIN
16G
16G
9D9226
PIN
16G, 16H NA
16G, 16H NA
16G, 16H, 16H NA