PIN ASSEM. 9J1105 - Caterpillar

Illustration 1 g06241251
Table 1
Item Qty Part Specification Description
1 1 167-2227 Buffer Seal As Lubricate the sealing lip of the buffer seal lightly with the fluid that is being sealed.
2 1 167-2345 U-Cup Seal Lubricate the sealing lip of the u-cup seal lightly with the fluid that is being sealed.
3 1 225-3293 Wiper Seal Lubricate the sealing lip of the wiper seal lightly with the fluid that is being sealed.
4 1 - Before assembly, apply green Loctite Retaining Compound 620 to the wiper seal groove.
5 1 6E-1364 Bushing Bore before assembly is 160.210 0.025 mm (6.3075 0.0010 inch).
Installation depth is 10.0 0.5 mm (0.39 0.02 inch).
6 1 3G-5022 Locknut Before assembly, lubricate the threads.
Torque to 13500 1350 N m (9957 996 lb ft).
A 1 479-3025 Cylinder As Bore is 292.15 0.10 mm (11.502 0.004 inch).
B 1 492-2714 Rod As Diameter is 146.000 0.038 mm (5.7480 0.0015 inch).
C 1 145-9900 Head Bore over two lands is 146.33 0.03 mm (5.761 0.001 inch).
7 1 374-4658 Bushing Bore before assembly is 140.34 0.02 mm (5.525 0.001 inch).
Installation depth is 10.0 0.5 mm (0.39 0.02 inch).
8 10 9X-6152 Bolt Torque to 3100 350 N m (2286 258 lb ft)
9 2 147-0169 Bolt Torque to 3100 350 N m (2286 258 lb ft)