9J6689 PIN AS Caterpillar parts
854G, D10N, D10R, D10T, D10T2, D9L
Rating:
Alternative (cross code) number:
CA9J6689
9J-6689
9J6689
CA9J6689
9J-6689
9J6689
Weight: 55 pounds 24 kg.
Information:
PIN LENGTH
327
mm
PIN OUTER DIAMERTER
101.6
mm
PIN PART NUMBER
9J6688
PLATE PART NUMBER
8J4789
LUBE OUTLET
N
PIN END TYPE
LEAD TAPER
PIN TRANSV HOLE
N
PLATE FIXING HOLES
N
TRACK-TYPE TRACTOR, WHEEL DOZER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 9J6689 GP Metering Pump Pin
CTP Provide better comfort to the operator because there is no load reaction on the steering wheel || Offer continuous operation with low input torque || Provide a wide selection of control circuits and meter sizes
CTP Provide better comfort to the operator because there is no load reaction on the steering wheel || Offer continuous operation with low input torque || Provide a wide selection of control circuits and meter sizes
CTP 9J6689 GP Metering Pump Pin
CTP Provide better comfort to the operator because there is no load reaction on the steering wheel || Offer continuous operation with low input torque || Provide a wide selection of control circuits and meter sizes
CTP Provide better comfort to the operator because there is no load reaction on the steering wheel || Offer continuous operation with low input torque || Provide a wide selection of control circuits and meter sizes
Number on catalog scheme:
5
For full view, you need register
Compatible equipment models: 9J6689:
Information:
Removal Procedure
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Turn the fuel supply to the OFF position.
Illustration 1 g01334899
Typical example
Remove plastic tube assembly (7) from fuel transfer pump (2) .Note: If the tube assembly has quick fit connections, ensure that the connections are clean before the tube assembly is plugged.
Disconnect plastic tube assembly (5) from the outlet of fuel transfer pump (2) .Note: If the tube assembly has quick fit connections, ensure that the connections are clean before the tube assembly is plugged.
Remove connector (6) from fuel transfer pump (2) . Remove the O-ring seal from connector (6) .If necessary, remove connector (9) from fuel transfer pump (2) . Remove the O-ring seal from the connector (9) .
Remove tube assembly (8) for the fuel return from the fuel transfer pump and the cylinder head.Note: Disconnect the tube assembly at the fuel transfer pump first in order to drain the fuel from the cylinder head.
Remove tube assembly (4) for the engine oil supply from fuel injection pump (1) .
Plug or cap all open ports and tube assemblies immediately with new plugs or caps.
Use an allen wrench with a ball end in order to remove allen head screws (3) that secure the fuel transfer pump to fuel injection pump (1) .
Illustration 2 g01335043
Remove fuel transfer pump (2) from fuel injection pump (1) .Note: Do not remove dowels (10) from the fuel injection pump.
Illustration 3 g01335045
Remove O-ring seal (11) from fuel transfer pump (2) .
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Turn the fuel supply to the OFF position.
Illustration 1 g01334899
Typical example
Remove plastic tube assembly (7) from fuel transfer pump (2) .Note: If the tube assembly has quick fit connections, ensure that the connections are clean before the tube assembly is plugged.
Disconnect plastic tube assembly (5) from the outlet of fuel transfer pump (2) .Note: If the tube assembly has quick fit connections, ensure that the connections are clean before the tube assembly is plugged.
Remove connector (6) from fuel transfer pump (2) . Remove the O-ring seal from connector (6) .If necessary, remove connector (9) from fuel transfer pump (2) . Remove the O-ring seal from the connector (9) .
Remove tube assembly (8) for the fuel return from the fuel transfer pump and the cylinder head.Note: Disconnect the tube assembly at the fuel transfer pump first in order to drain the fuel from the cylinder head.
Remove tube assembly (4) for the engine oil supply from fuel injection pump (1) .
Plug or cap all open ports and tube assemblies immediately with new plugs or caps.
Use an allen wrench with a ball end in order to remove allen head screws (3) that secure the fuel transfer pump to fuel injection pump (1) .
Illustration 2 g01335043
Remove fuel transfer pump (2) from fuel injection pump (1) .Note: Do not remove dowels (10) from the fuel injection pump.
Illustration 3 g01335045
Remove O-ring seal (11) from fuel transfer pump (2) .
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
D10R, D11N, D9L
10, D10, D10N, D11N, D9L, E650
D10N, D10R
D10N, D10R, D9L
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
D10R, D11R, D11T
D10R, D10T, D10T2
3G3628
PIN AS
854G, D9L
854G, D9L
1509632
PIN AS
834G, 834H, 834K, 836G, 836H, 836K
834G, 834H, 834K, 836G, 836H, 836K
2194881
PIN AS
834H
834H
1U4108
PIN
815B, 815F, 815F II, 854G
815B, 815F, 815F II, 854G
D11R, D11T
D10R, D10T, D10T2, D11N, D11R, D11T
8R3901
PIN AS
826C, 836
826C, 836
6W0425
PIN
826C
826C
6W7314
PIN
824C, 825C, 826C
824C, 825C, 826C
1073448
PIN-G.E.T.
816B, 826C
816B, 826C
4E9153
PIN AS-DRAWBAR
814B, 815B, 816B
814B, 815B, 816B
3V0944
PIN
815B, 816B
815B, 816B