9R8580 PIN AS Caterpillar parts
416B, 416C, 428B, 438B
Rating:
Alternative (cross code) number:
CA9R8580
9R-8580
9R8580
CA9R8580
9R-8580
9R8580
Weight: 10 pounds 4 kg.
Information:
PIN LENGTH
202.5
mm
PIN OUTER DIAMERTER
55
mm
PIN PART NUMBER
9R8581
PLATE PART NUMBER
9R8582
LUBE OUTLET
N
MAX. THREAD SIZE
M10X1.5
PIN END TYPE
CHAMFER
PIN TRANSV HOLE
N
PLATE FIXING HOLES
Y
BACKHOE LOADER,
Related part:
9R8580
PIN AS-YM
4181932
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
9R8580 One Pin A Fits Caterpillar 416B 416C BAN90-0418
Generic Package included: 1x 9R8580 One Pin A Fits Caterpillar 416B 416C BAN90-0418 as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Generic Package included: 1x 9R8580 One Pin A Fits Caterpillar 416B 416C BAN90-0418 as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
RATION for Fits Caterpillar PIN A 9R8580
RATION For Fits Caterpillar PIN A 9R8580 || Lower kit designed to fit Cummins engines, compatible with MPNs 3802029, 3802267, and 3936563. || Ensure optimal performance with this kit, perfect for 3802376 Ket application on Cummins engines. || Elevate your garden's beauty with our precision garden replacement parts. || To ensure compatibility, please check the product dimensions and review the provided images closely.
RATION For Fits Caterpillar PIN A 9R8580 || Lower kit designed to fit Cummins engines, compatible with MPNs 3802029, 3802267, and 3936563. || Ensure optimal performance with this kit, perfect for 3802376 Ket application on Cummins engines. || Elevate your garden's beauty with our precision garden replacement parts. || To ensure compatibility, please check the product dimensions and review the provided images closely.
RATION for Fits Caterpillar PIN A 9R8580
RATION For Fits Caterpillar PIN A 9R8580 || Compatible with equipment with PIN A 9R8580, ensuring a precise fit and reliable performance. || Designed to meet the specific requirements of machinery, durability and longevity in operation. || Elevate your garden beauty with our precision garden replacement parts. || To ensure compatibility, please check the product dimensions and review the provided images closely.
RATION For Fits Caterpillar PIN A 9R8580 || Compatible with equipment with PIN A 9R8580, ensuring a precise fit and reliable performance. || Designed to meet the specific requirements of machinery, durability and longevity in operation. || Elevate your garden beauty with our precision garden replacement parts. || To ensure compatibility, please check the product dimensions and review the provided images closely.
Number on catalog scheme:
3
For full view, you need register
Information:
Use this procedure to troubleshoot any suspect problems with the circuit for the coolant level sensor.The coolant level sensor monitors the engine coolant level in order to warn the operator when the coolant level is low.
Illustration 1 g01150024
Components of the coolant level sensor
(1) Sensor
(2) Sensor probe (brass dowel)
(3) Outer coating When the probe is not immersed in coolant, approximately +5 VDC is sourced to the signal wire. When this condition is detected by the Electronic Control Module (ECM), an event code is activated.Prior to troubleshooting any problems with the coolant level sensor, use Caterpillar Electronic Technician (ET) to check the installation status for the sensor. The coolant level sensor configuration parameter must be set to "Installed" in order for the ECM to monitor the signal from the sensor.The activation of an event code and/or a warning lamp is probably caused by a low coolant level. The next likely cause is a problem with the wiring harness, a connector, or the sensor.
Illustration 2 g02949436
Illustration 3 g02090761
Terminal locations at the harness connector for the coolant level sensor
(Terminal A) Sensor supply
(Terminal B) Sensor return
(Terminal C) Sensor signal
Table 1
Troubleshooting Test Steps Values Results
1. Inspect the Electrical Connectors and the Wiring
A. Turn the main disconnect switch to the OFF position.
B. Thoroughly inspect the ECM connectors and all other connectors connected with the sensors. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
C. Perform a 45 N (10 lb) pull test on each of the wires that are associated with the circuit for the coolant level sensor.
D. Check the allen head screw on each ECM connector for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for the correct torque values.
Electrical Connectors and the Wiring
Result: The harnesses and the wiring appear to be OK.
Proceed to Test Step 2.
Result: There is a problem with the connectors and/or the wiring.
Repair: The wiring and connectors or replace the wiring or the connectors. Ensure that all of the seals are properly connected.
Verify that the repair eliminates the problem.
2. Check the Supply Voltage at the Sensor Connector
A. Disconnect the coolant level sensor at the sensor connector.
B. Restore electrical power to the ECM.
C. Measure the voltage between terminals A (supply) and B (return) at the harness connector for the coolant level sensor.
D. Turn the main disconnect switch to the OFF position.
8.0 0.2 VDC
Result: The voltage measurement is 5.0 0.4 VDC.
The supply voltage is reaching the
Illustration 1 g01150024
Components of the coolant level sensor
(1) Sensor
(2) Sensor probe (brass dowel)
(3) Outer coating When the probe is not immersed in coolant, approximately +5 VDC is sourced to the signal wire. When this condition is detected by the Electronic Control Module (ECM), an event code is activated.Prior to troubleshooting any problems with the coolant level sensor, use Caterpillar Electronic Technician (ET) to check the installation status for the sensor. The coolant level sensor configuration parameter must be set to "Installed" in order for the ECM to monitor the signal from the sensor.The activation of an event code and/or a warning lamp is probably caused by a low coolant level. The next likely cause is a problem with the wiring harness, a connector, or the sensor.
Illustration 2 g02949436
Illustration 3 g02090761
Terminal locations at the harness connector for the coolant level sensor
(Terminal A) Sensor supply
(Terminal B) Sensor return
(Terminal C) Sensor signal
Table 1
Troubleshooting Test Steps Values Results
1. Inspect the Electrical Connectors and the Wiring
A. Turn the main disconnect switch to the OFF position.
B. Thoroughly inspect the ECM connectors and all other connectors connected with the sensors. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
C. Perform a 45 N (10 lb) pull test on each of the wires that are associated with the circuit for the coolant level sensor.
D. Check the allen head screw on each ECM connector for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for the correct torque values.
Electrical Connectors and the Wiring
Result: The harnesses and the wiring appear to be OK.
Proceed to Test Step 2.
Result: There is a problem with the connectors and/or the wiring.
Repair: The wiring and connectors or replace the wiring or the connectors. Ensure that all of the seals are properly connected.
Verify that the repair eliminates the problem.
2. Check the Supply Voltage at the Sensor Connector
A. Disconnect the coolant level sensor at the sensor connector.
B. Restore electrical power to the ECM.
C. Measure the voltage between terminals A (supply) and B (return) at the harness connector for the coolant level sensor.
D. Turn the main disconnect switch to the OFF position.
8.0 0.2 VDC
Result: The voltage measurement is 5.0 0.4 VDC.
The supply voltage is reaching the
Caterpillar parts catalog:
Parts pin Caterpillar catalog:
120, 120B, 140, 140B, 14E, 215, 227, 235, 245, 245B, 322B LN, 325 L, 325B L, 330B L, 350, 365B, 365B II, 375, 385B, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428, 428D, 430D, 436C, 446B, 5080, 5130, 5...
426B, 426C, 428, 428B, 436, 436C, 438, 438B
416B, 428, 446, 515, 525, 525B, 528B, 530B, 535B, 539, 545, 814B, 815B, 816B, 824C, 824K, 825C, 825K, 826C, 826K, 834K, 836K, 854K, 918F, 988K, 990K, 992K, 993K, 994F, 994H, CB-334D, CB-334E, CB-335D,...
416, 416B, 426B, 428, 436
312, 320, 325, 416B, 426, 428, 436, 910, 910E, 931B, 933, 939, D3C III, D4C III, D5C III, E110B, E120B, E200B, E240C, EL240B, IT12B
416C, 416D, 420D, 424D, 428C, 428D, 432D, 438C, 438D, 442D
416C, 416D, 424D, 428C, 438C
416C, 416D, 420D, 424B, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D
416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424B, 424D, 426C, 428C, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E
416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424B, 424B HD, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F
416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D
416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, D6R
416B, 416C, 426B, 426C, 428B, 436C, 438B
416, 416B, 426B, 428B
10 FT, 10B, 120, 120B, 12E, 140, 140B, 16, 2470C, 24M, 2570C, 2670C, 2864C, 323D L, 323D LN, 325D, 329D L, 330C, 330D, 330D L, 336D L, 336D LN, 345B, 345C, 345C L, 345D, 349D L, 365C L, 385C, 416, 416...
416B, 416C, 426B, 426C, 428B, 428C, 436C, 438C
120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 14...
6Y5262
PIN-ROLL
416B, 426, 426B, 428, 428B, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C
416B, 426, 426B, 428, 428B, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C
10 FT, 10-20B, 10B, 117, 118, 119, 120, 120B, 120G, 127, 128, 129, 12E, 12F, 12G, 130G, 140, 140B, 140G, 141, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 163, 1673, 16G, 16H, 16H NA, 16M, 172, 173B, 183, 18...
120, 120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14G, 14H, 14H NA, 153,...
416B, 416C, 416D, 416E, 420D, 420E, 426B, 426C, 430D, 430E, 436, 436C
416B, 416C, 416D, 420D, 424D, 428B, 428C, 428D, 432D, 438B, 438C, 438D, 442D
416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 438D, 442D
416B, 416C, 426B, 426C, 428, 428B, 428C, 436, 436C, 438B, 438C