2797750 PINION SET Caterpillar parts
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 3...
Rating:
Alternative (cross code) number:
CA2797750
279-7750
2797750
CA2797750
279-7750
2797750
Weight: 0.18 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 2797750:
Number on catalog scheme:
9
For full view, you need register
Information:
start by:a) remove tandem drive housing 1. Remove the bearing retainer, lock and bolts (1).
Bearing (2) is self-aligning. To prevent pressure to the outer race of the bearing, pull against the sprocket as shown.
2. Install tooling (A). Fasten a hoist to tooling (A) and remove the bearing, spacer behind the bearing, ring assembly, sprockets (3) and the spacer.Install Drive Sprockets
1. Make sure the splines on the shafts and sprockets are clean, dry and free of burrs.2. Install the spacer on the shaft. Put the sprockets on the axle shaft with the splines in the sprocket engaged with the splines on the shaft. 3. Install ring assembly (1) with the oil slingers toward the bearing as shown.4. Heat the bearing to a maximum temperature of 275°F (135°C). Install spacer (2), bearings, retainer, lock and bolts.end by:a) install tandem drive housing
Bearing (2) is self-aligning. To prevent pressure to the outer race of the bearing, pull against the sprocket as shown.
2. Install tooling (A). Fasten a hoist to tooling (A) and remove the bearing, spacer behind the bearing, ring assembly, sprockets (3) and the spacer.Install Drive Sprockets
1. Make sure the splines on the shafts and sprockets are clean, dry and free of burrs.2. Install the spacer on the shaft. Put the sprockets on the axle shaft with the splines in the sprocket engaged with the splines on the shaft. 3. Install ring assembly (1) with the oil slingers toward the bearing as shown.4. Heat the bearing to a maximum temperature of 275°F (135°C). Install spacer (2), bearings, retainer, lock and bolts.end by:a) install tandem drive housing
Cat SIS web machinery list:
Parts pinion Caterpillar catalog:
0969503
PINION
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN, E110, E110B, E120B, E200B
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN, E110, E110B, E120B, E200B
1352365
PINION SET
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
3333056
PINION
315D L, 316E L, 318D L, 318D2 L
315D L, 316E L, 318D L, 318D2 L
1352365
PINION SET
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
0969503
PINION
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN, E110, E110B, E120B, E200B
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN, E110, E110B, E120B, E200B
1938430
PINION
304.5
304.5
0992191
PINION
305.5, 306, 307B, 307C, 307D, 308C
305.5, 306, 307B, 307C, 307D, 308C
1358468
PINION
313B
313B
0968752
PINION
313B
313B
3754478
PINION-GEAR
M315C, M315D, M316C, M316D, M317D 2, M318C, M318D, M318D MH
M315C, M315D, M316C, M316D, M317D 2, M318C, M318D, M318D MH
2384728
PINION-GEAR
M315C, M316C, M318C
M315C, M316C, M318C
2919451
PINION-PLANETARY
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318D, M318D MH, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D, MH3037
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318D, M318D MH, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D, MH3037
2900297
PINION
M315C, M315D, M316C, M316D, M318C, M318D
M315C, M315D, M316C, M316D, M318C, M318D
1992344
PINION SET
302.5C, 303, 304
302.5C, 303, 304
3233224
PINION SET
304, 305
304, 305