PINION (38 T.) 2F6045 - Caterpillar

Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Install the truck body retaining cables. Refer to Operation and Maintenance Manual, "Cable (Truck Body Retaining)".
Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure Release".
Illustration 1 g06273081
Illustration 2 g06273085
Illustration 3 g06273698
Illustration 4 g06273744
Illustration 5 g06273752
Illustration 6 g06273385
Illustration 7 g06273610
Illustration 8 g06274259
Separate the hydraulic control valve from the sleeve then remove the hydraulic control valve.
Illustration 9 g06274417Installation Procedure
Install the transmission hydraulic control in the reverse order of removal.
Illustration 10 g06273615