PINION 6T6053 - Caterpillar

6T6053 PINION Caterpillar parts D5B, D5E

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6T6053
6T-6053
6T6053

Weight: 30 pounds 13 kg.

Buy PINION 6T6053 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

$311.10

25 Feb 2022

US: Florida-Parts-Z

6T6053 - Pinion for Caterpillar (CAT)
FIRST PRICE PARTS

$335.69

08 Sep 2018

CATERPILLAR AFTERMARKET: CATERPILLAR AFT

Caterpillar Pinion 11T 6T6053 New

CTP Caterpillar Pinion 11t (6t6053) Aftermarket

$407.01

09 May 2022
31.6804[14.26] Pounds
US: ProperBuy

CTP Caterpillar Pinion 11t (6t6053) Aftermarket
CTP

Show more prices Caterpillar parts

Number on catalog scheme: 67

For full view, you need register

Compatible equipment models: 6T6053:

TRACK-TYPE TRACTOR D5B D5E Caterpillar

Information:

System Operation Description:The code indicates a warning for low fan speed. The warning will appear if the feedback to the Electronic Control Module (ECM) is not within 300 rpm of the commanded speed. The warning will also appear if communication to the fan has been lost.Use this procedure to troubleshoot the aftertreatment cooling fan or use this procedure if the diagnostic code in Table 1 is active or logged.Note: The following code may not be applicable for certain applications.
Table 1
Diagnostic Trouble Codes
CDL Code J1939 Code Description
(code descriptions may vary) System Response
E1190 (3) 5562-1 Aftertreatment Fan Speed - Low The code is logged if the fan speed is not within 300 rpm of the commanded speed. Also, the code will be logged if communication for the CAN data link is lost between the Electronic Control Module (ECM) and the fan.
3548-5 Aftertreatment Cooling Fan Control Module : Current Below Normal The ECM has detected an open circuit on the aftertreatment cooling fan circuit.
3548-6 Aftertreatment Cooling Fan Control Module : Current Above Normal The ECM has detected a short circuit on the aftertreatment cooling fan circuit.
3548-8 Aftertreatment Cooling Fan Control Module : Abnormal Frequency, Pulse Width, or Period The code is logged if the fan speed is not within 300 rpm of the commanded speed.
3548-11 Aftertreatment Cooling Fan Control Module : Other Failure Mode The aftertreatment cooling fan is receiving low supply voltage or has failed internally.
E1352 (3) DFW Aftercooler Out Temperature sensor open/short to +batt The internal temperature of the aftertreatment cooling fan exceeded the maximum allowable temperature/threshold. The fan is NOT failed. Note: The E1352 (3) code indicates that the aftertreatment cooling fan internal temperature has exceeded the maximum threshold. The fan will shut down, and the machine should be shut down as soon as possible to avoid damage. The aftertreatment cooling fan is not failed.Note: The following schematic is used for Motor Grader Applications
Illustration 1 g03382615
Motor Grader Applications
Note: The following schematic is used for Articulated Truck Applications