PINION 6V6128 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before installation, all components and mating surfaces should be thoroughly clean. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. If any gaskets or seals are worn or damaged, use new gaskets or seals for replacement. Lubricate O-ring seals with the fluid that is being sealed. All installation procedures should be performed in a clean work area.
Illustration 1 g00838534
Position air/hydraulic cylinder (1) onto the plate assembly that is between the steering tank and the air tank. Install the hard washers and bolts (5).
Connect tube assembly (4) to air/hydraulic cylinder (1).
Connect hose assembly (3) to air/hydraulic cylinder (1).
Illustration 2 g00838533
Connect hose assembly (2) to air/hydraulic cylinder (1).