9W1288 PINION-BEVEL Caterpillar parts
D7H, D7R, D7R II, D8N
Rating:
Alternative (cross code) number:
CA9W1288
9W-1288
9W1288
CA9W1288
9W-1288
9W1288
Weight: 3 pounds 1 kg.
TRACK-TYPE TRACTOR,
Information:
Illustration 1 g00103003
Note: Low Ground Pressure (LGP) machines have an inner hub that is wider than the hub on the standard machines. Both machines have the same specifications and the same installation procedures. (1) Torque for 30 bolts ... 460 60 N m (340 44 lb ft) (2) Rubber toric seals must be clean and dry at assembly. All surfaces that contact the toric seals must be clean and dry at assembly. At assembly, apply a thin film of oil to the contacting surfaces of the metal seal. Seal rings must be assembled squarely with the bore. The toric ring must not bulge and the toric ring must not be twisted. Refer to 6Y-0300 Installation Instructions for Conventional Duo-Cone Seal Assemblies. (5) Torque for bolts ... 120 20 N m (90 15 lb ft)Note: Be sure that there is metal to metal contact between retainer (4) and spindle (3) before the bolts are tightened. (6) Torque for 28 bolts ... 460 60 N m (340 44 lb ft) (7) Torque for plug ... 105 10 N m (77 7 lb ft) (8) Put SAE 30W lubricant on the threads of the sprocket bolts. First, tighten the sprocket bolts to the following torque. ... 175 40 N m (130 30 lb ft)Then, tighten the sprocket bolts by an additional 1/3 turn.Minimum torque after the additional 1/3 turn ... 380 N m (280 lb ft)
Caterpillar parts catalog:
Parts pinion Caterpillar catalog:
8B0192
PINION (24 & 28T)
561B, 977D
561B, 977D
7H7576
PINION (23T)
977D
977D
9F6182
PINION (12T)
977D
977D
7B5375
PINION (21T)
561B, 977D
561B, 977D
1M1531
PINION (11T)
561B, 977D
561B, 977D
1M0292
PINION (10T)
561B, 977D
561B, 977D
1M5165
PINION (12 T)
977D
977D
9B3186
PINION (12 T)
977D
977D
8E1441
PINION-BEVEL
518, 527, 931B, D5C, D5HTSK II
518, 527, 931B, D5C, D5HTSK II