PIPE MUFFLER 0721022 - Caterpillar

Press the intended Units button in the Units menu button group (15). The button will first turn to blue, then to yellow. A black check mark will appear in the selected menu button.
The Display will adjust to the new measurement unit.Press the BACK button (7) to return to the previous page.Press the HOME button (8) to return to the Home page.Clock Setting
Display > ClockThe clock (17) appears in the lower left-hand corner of the Information Banner.
Illustration 11 g06210406
(3) Non-Interactive Scroll Bar with Menu Sliding Indicator
(4) UP ARROW button
(5) OK button
(6) DOWN Arrow button
(7) BACK button
(8) HOME button
(16) Clock menu button
(17) Clock reading on the Lower Information BannerThe clock reading can be set to either 12-hour time or 24-hour time.12 Hour Time (Manual Mode)
Illustration 12 g06210427
Clock Settings Page
The clock settings page with the Auto/Manual Format button (20) switched OFF and is in the Manual mode. The Hours Display Format button (22) is set to 12 hours. As a result, the AM/PM Display Format button (18) is visible.
(17) Clock reading on the Lower Information Banner
(18) AM/PM Display Format button (Visible)
(19) Increment/Decrement Bar (Hours)
(20) Auto/Manual Format button (Manual)
(21) Increment/Decrement Bar (Minutes)
(22) Hours Display Format button (12 Hours)
Press the PLUS (+) button or the MINUS button (-) on the Hours Increment/Decrement bar (19) to change the Hours settings. The numbers in the bar will turn yellow during the change. Release the PLUS or MINUS button to set the Hours. The number will return to white.
Press the PLUS (+) button or the MINUS button (-) on the Minutes Increment/Decrement bar (21) to change the Minutes settings. The numbers in the bar will turn yellow during the change. Release the PLUS or MINUS button to set the Minutes. The number will return to white.12 Hour Time (AUTO Mode)
Illustration 13 g06210450
The clock settings page where the Auto/Manual Format button (20) is ON and is in the AUTO mode. The Hours Display Format button (22) is set to 12. However, the AM/PM display button is not visible because the Auto/Manual Format is set to AUTO.
(18) AM/PM Display Format button (Not visible)
(20) Auto/Manual Format button (AUTO)
(22) Hours Display Format button (12 Hours)24 Hour Time (Manual Mode)
Illustration 14 g06210461
The clock settings page where the Hours Display Format button (22) is set to 24 hours.
(17) Clock reading on the Lower Information Banner
(18) AM/PM Display Format button (Not Visible)
(19) Increment/Decrement Bar (Hours)
(20) Auto/Manual Format button (Manual)
(21) Increment/Decrement Bar (Minutes)
(22) Hours Display Format button (24 Hours)
Press the Clock menu button (16). The button will first turn to blue, then to yellow. The Clock settings page will appear.
To allow the clock to set automatically, press the Auto/Manual Format button (20). When the button moves to the right side and appears in green, the Automatic Time Setting feature is on. The clock cannot be set manually unless the Auto/Manual Format button is pressed, moving to the left and appearing in gray.
To adjust the Hours, press either the MINUS (-) Arrow button or the PLUS (+) Arrow button on the Hours Increment/Decrement Bar. The numbers will appear in