0942013 PIPE,SUPPLY Caterpillar parts
Rating:
Alternative (cross code) number:
CA0942013
094-2013
0942013
CA0942013
094-2013
0942013
Weight: 4 pounds 2 kg.
Information:
start by: a) remove arm cushion (left side only) The seat was removed for photo illustration.1. Pull the opposite lever back and remove screw (1) and knob (2) from the steering clutch and brake levers. Remove the other knob the same way. 2. Remove the bolts that hold the panel in place. Remove panel (3). 3. Remov the bolts that hold the access panel in position. Remove access panel (4). 4. Remove rod (5) from the levers. 5. Remove nut (9) and bolt that hold bracket (8) to the transmission control lever. Remove bracket (8).6. Disconnect the wires for the backup alarm switch at the connectors. Remove two bolts (6) and switch (7) from the left console. 7. Bend lock (11) down. Remove bolt (12) and nut that hold transmission control lever (10) in place. Remove the transmission control lever (10). Remove the spacer from transmission control lever (10). 8. Remove bushing (13) from transmission control lever (10) with tooling (A). Install Transmission Control Lever And Backup Alarm Switch
For correct adjustment of the transmission control lever, see SPECIFICATIONS Form No. SENR2335 before installation.1. Install bushing (2) in transmission control lever (1) with tooling (A). 2. Put spacer (3) in position in the bushings. 3. Put transmission control lever (1) in position and install the lock, bolt, lock and nut that hold the transmission control lever to the yoke. 4. Install bracket (4) on the transmission control lever. 5. Put backup alarm switch (5) in position on the side of the console. Install the two bolts that hold it in place. Connect wires (7) at the connectors. 6. Install rod (6) to the rear lever and transmission control lever.7. Put access panel (8) in position and install the bolts that hold it to the console. 8. Install panel (9) and the bolts that hold it in place. 9. Pull the opposite lever back and install knob (10). Install the knob on the other lever.end by: a) install arm cushions (left side only)
For correct adjustment of the transmission control lever, see SPECIFICATIONS Form No. SENR2335 before installation.1. Install bushing (2) in transmission control lever (1) with tooling (A). 2. Put spacer (3) in position in the bushings. 3. Put transmission control lever (1) in position and install the lock, bolt, lock and nut that hold the transmission control lever to the yoke. 4. Install bracket (4) on the transmission control lever. 5. Put backup alarm switch (5) in position on the side of the console. Install the two bolts that hold it in place. Connect wires (7) at the connectors. 6. Install rod (6) to the rear lever and transmission control lever.7. Put access panel (8) in position and install the bolts that hold it to the console. 8. Install panel (9) and the bolts that hold it in place. 9. Pull the opposite lever back and install knob (10). Install the knob on the other lever.end by: a) install arm cushions (left side only)
Parts pipe Caterpillar catalog:
0942012
PIPE,SUPPLY
Caterpillar
Caterpillar
0942011
PIPE,SUCTION
Caterpillar
Caterpillar
0942009
PIPE,DRAIN
Caterpillar
Caterpillar
0942008
PIPE,SUPPLY
Caterpillar
Caterpillar
0942007
PIPE,RETURN
Caterpillar
Caterpillar
0942006
PIPE,SUPPLY
Caterpillar
Caterpillar
0942020
PIPE,SUPPLY
Caterpillar
Caterpillar
0942018
PIPE,DRAIN
Caterpillar
Caterpillar
0942017
PIPE,SUPPLY
Caterpillar
Caterpillar
0942016
PIPE,SUPPLY
Caterpillar
Caterpillar
0942015
PIPE,SUPPLY
Caterpillar
Caterpillar
0942014
PIPE,SUPPLY
Caterpillar
Caterpillar